MX29LV400CB

www.DataSheet4U.com MX29LV400C T/B 4M-BIT [512K x 8 / 256K x 16] CMOS SINGLE VOLTAGE 3V ONLY FLASH MEMORY FEATURES Extended single - supply voltage range 2.7V to 3.6V 524,288 x 8/262,144 x 16 switchable Single power supply operation - 3.0V only operation for read, erase and program operation Fully compatible with MX29LV400T/B device Fast access time: 55R/70/90ns Low power consumption - 30mA maximum active current - 0.2uA typical standby current Command register architecture - Byte/word Programming (9us/11us typical) - Sector Erase (Sector structure 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x1, and 64K-Byte x7) Auto Erase (chip & sector) and Auto Program - Automatically erase any combination of sectors with Erase Suspend capability - Automatically program and verify data at specified address Erase suspend/Erase Resume - Suspends sector erase operation to read data from, or program data to, any sector that is not being erased, then resumes the erase Status Reply - Data# Polling & Toggle bit for detection of program and erase operation completion Ready/Busy# pin (RY/BY#) - Provides a hardware method of detecting program or erase operation completion Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotect allows code changes in previously locked sectors CFI (Common Flash Interface) compliant - Flash device parameters stored on the device and provide the host system to access 100...