Opto-Switch
www.DataSheet4U.com
EE-SX493
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Photomicrosenso...
Description
www.DataSheet4U.com
EE-SX493
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Photomicrosensor
(Transmissive)
Features
Incorporates an IC chip with a built-in detector element and amplifier. Incorporates a detector element with a built-in temperature compensation circuit. A wide supply voltage range: 4.5 to 16 VDC Directly connects with C-MOS and TTL. Allows highly precise sensing with a 0.2-mm-wide sensing aperture.
6
0.2 9.5
6.5±0.05
6.9±0.5 Five, 0.25 Five, 0.5
(1.25)
(1.25)
Pull-off taper: 1/25 max. 0.75±0.1
Absolute Maximum Ratings (Ta = 25°C)
Item Emitter Forward current Reverse voltage Symbol IF VR VCC VOUT IOUT POUT Topr Tstg Tsol Rated value 50 mA (see note 1) 4V 16 V 28 V 16 mA 250 mW (see note 1) –40°C to 60°C –40°C to 85°C 260°C (see note 2)
Cross section AA
Cross section BB
Internal Circuit
K V O A G
7±0.1
Two, 1 –0.2 dia. (Tip dimension)
0
Detector
Power supply voltage
Output voltage Output current
Permissible output dissipation
Unless otherwise specified, the tolerances are as shown below. Dimensions 3 mm max. 3 t mm v 6 6 t mm v 10 10 t mm v 18 18 t mm v 30 Tolerance ±0.125 ±0.150 ±0.180 ±0.215 ±0.260
Terminal No. A K V O G
Name Anode Cathode Power supply (Vcc) Output (OUT) Ground (GND)
Ambient temperature
Operating Storage
Soldering temperature Note:
1. Refer to the temperature rating chart if the ambient temperature exceeds 25°C. 2. Complete soldering within 10 seconds.
Electrical and Optical Char...
Similar Datasheet