Transceiver. IBM42P10LNYAA10 Datasheet

IBM42P10LNYAA10 Datasheet PDF


Part

IBM42P10LNYAA10

Description

(IBM42P1xxNYAA10) Gigabit Ethernet / Fiber Channel Small Form Factor Hot Pluggable Transceiver

Manufacture

IBM Microelectronics

Page 30 Pages
Datasheet
Download IBM42P10LNYAA10 Datasheet


IBM42P10LNYAA10 Datasheet
www.DataSheet4U.com
. IBM42P12SNYAA10 IBM42P10SNYAA10
IBM42P12LNYAA10 IBM42P10LNYAA10
Gigabit Ethernet/Fibre Channel Small Form Factor Hot-Pluggable Transceiver
Features
• International Class 1 laser safety certified
• 1.0625 Gb/s or 1.25 Gb/s data rates
• (ANSI) Fibre Channel compliant [1]
• (IEEE 802.3z) Gigabit Ethernet compliant [3]
• Short wavelength (SW) (distance 550 m)
• Long wavelength (LW) (distance 10,000 m)
• Low Power Dissipation, 500 mW Typical
• Serial electrical light conversion
• Receiver Loss of Signal Output
• AC coupling of PECL signals
• Single +3.3 V Power Supply
• Serial ID module on MOD(0-2)
• UL and CSA approved
• Low bit error rate (< 10-12)
• High reliability: AFR < 0.01%/khr@50°C,100 FIT
Applications
• Gigabit Fibre Channel
• Gigabit Ethernet
• Client/Server environments
• Distributed multi-processing
• Fault tolerant applications
• Visualization, real-time video, collaboration
• Channel extenders, data storage, archiving
• Data acquisition
Description
The 1.0625/1.25Gbps Serial Optical Converter
(SFF-PGG-1063/1250-SW/LW) is an integrated
fiber optic transceiver that provides a high-speed
serial link at a signaling rate up to 1.25Gb/s. The
SFF-PGG-1063-SW/LW conforms to the American
National Standards Institute’s (ANSI) Fibre Channel,
FC-PI specification for short and long wavelength
operation (100-M5-SN-I,100-M6-SN-I, and 100-SM-
LC-L). The SFF-PGG-1250-SW conforms to IEEE
802.3z 1000Base-SX standard [3], and the SFF-
PGG-1250-LW conforms to IEEE 802.3z 1000Base-
LX standard [3].
The SFF-PGG-1063/1250-SW/LW is ideally suited
for Gigabit Ethernet, and Fibre Channel applications
which include point to point links as well as Fibre
Channel Arbitrated Loop (FC-AL). It can also be
used for other serial applications where high data
rates are required. This specification applies to a
hot-pluggable (PGG) module which has a 2 by 10
electrical surface mount connector assembly.
The SFF-PGG-1063/1250-SW/LW transceiver fea-
tures a Serial ID module. The Serial ID module can
store up to 128 bytes of vital product data.
The SFF-PGG-1063/1250-SW uses a short wave-
length (850nm) VCSEL (Vertical Cavity Surface
Emitting Laser) source. This enables low cost data
transmission over optical fibers at distances up to
500m at 1.0625Gb/s and 550m at 1.25Gb/s. A
50/125µm multimode optical fiber, terminated with
an industry standard LC connector, is the preferred
medium. (A 62.5/125µm multimode fiber can be
substituted with shorter maximum link distances.)
The SFF-PGG-1063/1250-LW uses a long wave-
length (1310nm) edge-emitting laser. This enables
data transmission at distances up to 10,000m on a
single mode (9/125µm) optical fiber.
Encoded (8B/10B) [4], [5], gigabit serial differential
PECL signals traverse the connector interfacing the
SFF-PGG-1063/1250-SW/LW to the host card. The
incoming serial data modulates the laser and is sent
out over the outgoing fiber of a duplex cable.
Incoming modulated light is detected by a photore-
ceiver mounted in the LC receptacle. The optical
signal is converted to an electrical signal, amplified
and delivered to the host card. This module is
designed to work with industry standard “10b” Seri-
alizer/Deserializer modules.
The SFF-PGG-1063/1250-SW/LW is a Class 1 laser
safe product. The optical power levels under normal
operation are at eye safe levels, and optical fiber
can be connected and disconnected without shut-
ting off the laser transmitter.
03/01/01
Page 1 of 33

IBM42P10LNYAA10 Datasheet
www.DataSheet4U.com
IBM42P10SNYAA10 IBM42P12SNYAA10
IBM42P10LNYAA10 IBM42P12LNYAA10
Gigabit Ethernet/Fibre Channel Small Form Factor Hot-Pluggable Transceiver
Package Outline
Pin Definitions
Pin #
1
2
3
4
5
6
7
8
9
10
Pin Name
Tx Ground
Tx_Fault
Tx_Disable
MOD_DEF(2)
MOD_DEF(1)
MOD_DEF(0)
1_2Gbps
Rx_LOS
Rx Ground
Rx Ground
Type
Ground
Signal Out
Signal In
Input/Output
Input/Output
Input/Output
Not Connected
Signal Out
Ground
Ground
Sequence
1
3
3
3
3
3
3
3
1
1
Pin #
11
12
13
14
15
16
17
18
19
20
Pin Name
Rx Ground
-Rx_DAT
+Rx_DAT
Rx Ground
Rx Power
Tx Power
Tx Ground
+Tx_DAT
-Tx_DAT
Tx Ground
Type
Ground
Data Out
Data Out
Ground
Power
Power
Ground
Data In
Data In
Ground
Sequence
1
3
3
1
2
2
1
3
3
1
Laser Safety Compliance Requirements
The SFF-PGG-1063/1250-SW/LW is designed and
certified as a Class 1 laser product. If the power sup-
ply voltage exceeds 4.0 volts, the transceiver may
no longer remain a Class 1 product. The system
using the SFF-PGG-1063/1250-SW/LW must pro-
vide power supply over-voltage protection that guar-
antees the supply does not exceed 4.0 volts under
all conditions.
Caution: Operating the power supply above 4.0V or
otherwise operating the SFF-PGG-1063/1250-
SW/LW in a manner inconsistent with its design and
function may result in hazardous radiation exposure,
and may be considered an act of modifying or new
manufacturing of a laser product under US regula-
tions contained in 21 CFR(J) or CENELEC regula-
tions contained in EN 60825. The person(s)
performing such an act is required by law to recertify
and reidentify the product in accordance with the
provisions of 21 CFR(J) for distribution within the
United States, and in accordance with provisions of
CENELEC EN 60825 (or successive regulations) for
distribution within the CENELEC countries or coun-
tries using the IEC 825 standard.
ESD Notice
It is advised that normal static precautions be taken
in the handling and assembly of the SFF-PGG-
1063/1250-SW/LW to prevent damage and/or deg-
radation which may be introduced by electrostatic
discharge.
Page 2 of 33
03/01/01


Features Datasheet pdf www.DataSheet4U.com IBM42P12SNYAA10 IBM 42P10SNYAA10 IBM42P12LNYAA10 IBM42P10LN YAA10 Gigabit Ethernet/Fibre Channel Sm all Form Factor Hot-Pluggable Transceiv er . Features • • • • • • • • • • • • • • • Int ernational Class 1 laser safety certi ed 1.0625 Gb/s or 1.25 Gb/s data rates (ANSI) Fibre Channel compliant [1] (IE EE 802.3z) Gigabit Ethernet compliant [ 3] Short wavelength (SW) (distance ≤ 550 m) Long wavelength (LW) (distance 10,000 m) Low Power Dissipation, 500 mW Typical Serial electrical ⇔ light conversion Receiver Loss of Signal Out put AC coupling of PECL signals Single +3.3 V Power Supply Serial ID module on MOD(0-2) UL and CSA approved Low bit e rror rate (< 10-12) High reliability: A FR < 0.01%/khr@50°C,100 FIT Applicati ons • • • • • • • • Gig abit Fibre Channel Gigabit Ethernet Cli ent/Server environments Distributed mul ti-processing Fault tolerant applicatio ns Visualization, real-time video, collaboration Channel extenders, data storage, archiving Data acquisition Descript.
Keywords IBM42P10LNYAA10, datasheet, pdf, IBM Microelectronics, IBM42P1xxNYAA10, Gigabit, Ethernet, /, Fiber, Channel, Small, Form, Factor, Hot, Pluggable, Transceiver, BM42P10LNYAA10, M42P10LNYAA10, 42P10LNYAA10, IBM42P10LNYAA1, IBM42P10LNYAA, IBM42P10LNYA, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)