3.0 GHz Low Noise Silicon MMIC Amplifier
3.0 GHz Low Noise Silicon MMIC Amplifier Technical Data
INA-54063
Features
• Ultra-Miniature Package • Single 5 V Suppl...
Description
3.0 GHz Low Noise Silicon MMIC Amplifier Technical Data
INA-54063
Features
Ultra-Miniature Package Single 5 V Supply (29␣ mA) 21.5 dB Gain (1.9 GHz) 8.0 dBm P1dB (1.9 GHz) Positive Gain Slope Unconditionally Stable
Surface Mount Package SOT-363 (SC-70)
Description
Hewlett-Packard’s INA-54063 is a Silicon monolithic amplifier that offers excellent gain and power output for applications to 3.0␣ GHz. Packaged in an ultraminiature SOT-363 package, it requires half the board space of a SOT-143 package. With its wide bandwidth and high linearity, the INA-54063 is an excellent candidate for DBS IF applications. It also features a unique gain curve which increases over the range from 1 to 2␣ GHz. This gain slope compensates for the gain rolloff found in typical receiver systems. The INA-54063 is fabricated using HP’s 30 GHz fMAX ISOSAT™ Silicon bipolar process which uses nitride self-alignment submicrometer lithography, trench isolation, ion implantation, gold metalization, and polyimide intermetal dielectric and scratch protection to achieve superior performance, uniformity, and reliability.
Applications
IF Amplifier for DBS Downconverter, Cellular, Cordless, Special Mobile Radio, PCS, ISM, and Wireless LAN Applications
Pin Connections and Package Marking
GND 1 OUTPUT 6 and V d 5 GND 4 VCC
54
GND 2 INPUT 3
Equivalent Circuit
(Simplified)
Note: Package marking provides orientation and identification.
Vd
RF INPUT
RF OUTPUT and Vd
GROUND
6-163
5965-5364E
I...
Similar Datasheet