www.DataSheet4U.com
polyfet rf devices
Power RF Amplifiers
Power = 10.0 Watts Bandwidth = 300 to 512 Mhz Gain = 25.0 dB...
www.DataSheet4U.com
polyfet rf devices
Power RF Amplifiers
Power = 10.0 Watts Bandwidth = 300 to 512 Mhz Gain = 25.0 dB Vdd = 28.0 Volts 50 ohms Input/Output Impedance
PHM022
Description
The PHM022 is a 12 Watt FM / 4 Watt AM amplifier module covering a bandwidth of 300-512 Mhz. It has a high IP3 rating when operated in the AM mode. This dual stage amplifier is specifically designed for Tetra and Land Mobile UHF band portable radio applications.
Absolute Maximum Ratings (T=25 oC)
Parameter DC supply Voltage 1 DC supply Voltage 2 AGC Voltage Input Power Output Power Operating Case Temp. Storage Temperature Symbol VDD1 VDD2 VAGC Pin Pout Tc Tstg Value
32.0 5.50 0.05 15.0
-20 to +70 -30 to +100
Unit V V V W W o C o C
Electrical Characteristics: ( T=25 oC Zs=Zl=50 ohms. Vdd= 28.0 Volts )
ww.DataSheet4U.com
Parameter Frequency Range Outut Power Power Gain Total Efficiency 2nd Harmonics Intermod - 2 tone Load Mismatch Tolerance
Symbol BW Po PG h dso Ip3 VSWR
Min
300 10.0 25.0 20
Typical
Max
512
-20.00 45.00 10:1
Unit Mhz Watts dB % dBc dBm Relative
Test Conditions 50 ohm load 1.20 Amps Idq = @ Pout = 10.0 Watts @ Pout = 10.0 Watts @ Pout = 10.0 W. Freq = 406 Mhz Freq = 406 Mhz; AvePwr= 2.0 W All Phase Angles
POLYFET RF DEVICES
www.DataSheet4U.com
REVISION
03/23/2004
1110 Avenida Acaso, Camarillo, Ca 93012 Tel:(805) 484-4210 FAX: (805) 484-3393 EMAIL:
[email protected] URL:www.polyfet.com
DataSheet4 U .com
www.DataSheet4U www.DataSheet4U.com 4U.com
www.DataSH...