InSb Hall Element
www.DataSheet4U.com
InSb Hall Element
HW-108C
•High-linearity InSb Hall element. •Super mini-mold SMT package (fits SO...
Description
www.DataSheet4U.com
InSb Hall Element
HW-108C
High-linearity InSb Hall element. Super mini-mold SMT package (fits SOT 343 land pattern). Shipped in packet-tape reel (4000pcs per reel).
Note : It is requested to read and accept "IMPORTANT NOTICE".
Please be aware that AKE products are not intended for use in life support equipment, devices, or systems. Use of AKE products in such applications requires the advance written approval of the appropriate AKE officer. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of AKE products in such applications is understood to be fully at the risk of the customer using AKE devices or systems.
Absolute Maximum Ratings
Item Symbol Limit Unit
Max. Input Current
Ic
Const. Current Drive
20
mA
Operating Temp. Range
Topr.
–40 to +110
˚C
Storage Temp. Range
Tstg.
–40 to +125
˚C
Classification of Output Hall Voltage (VH)
Rank VH [ mV ] Conditions
Electrical Characteristics(Ta=25˚C)
Item Symbol Conditions Min. Typ. Max. Unit Q 41 to 57 B=50mT, Vc=IV Constant Voltage Drive R 250 250 –7 450 450 DataSheet4U.com +7 mV 51 to 74
Output Hall Voltage
VH
Const. Voltage Drive
B=50mT, Vc=IV B=0mT, Ic=0.1mA B=0mT, Ic=0.1mA B=0mT, Vc=IV
41
74
mV
Input Resistance Output Resistance Offset Volt...
Similar Datasheet