M55342K12B2B80R

www.DataSheet4U.com E/H Vishay Thin Film QPL MIL-PRF-55342 Qualified Thin Film Resistor Chips FEATURES Established reliability, “R” failure rate level SURFACE MOUNT SURFACE MOUNT CHIPS High purity alumina substrate for high power Wraparound termination featuring a tenacious adhesion layer covered with an electroplated nickel barrier layer for + 150°C operating conditions Very low noise and voltage coefficient Non-inductive Laser-trimmed tolerances to ± 0.1% Wraparound resistance less than 0.010 ohms typical In-lot tracking less than 5ppm/°C Complete MIL-testing available in-house Antistatic waffle pack or tape and reel packaging available Actual Size M55342/02 Thin Film Mil chip resistors feature all sputtered wraparound termination for excellent adhesion and dimensional uniformity. They are ideal in applications requiring stringent performance requirements. Established reliability is assured through 100% screening and extensive environmental lot testing. Wafer is sawed producing exact dimensions and clean, straight edges. NOTE: Specification changed by DSCC from MIL-R-55342 to MIL-PRF-55342. TYPICAL PERFORMANCE ABS CONSTRUCTION Passivation Resistor Film Solder coating Nickel barrier High Purity Alumina Substrate Adhesion layer TCR TOL 25 0.1 DataShee DataSheet4U.com STANDARD ELECTRICAL SPECIFICATIONS TEST MATERIAL Absolute TCR: Absolute Tolerance: Stability: ∆R Absolute Voltage Coefficient Operating Temperature Range Storage Temperature Range...