DO1607BL

www.DataSheet4U.com Document 204 Backlight Inductors - DO1607BL Series The low profile DO1607BL Series has the high breakdown voltage ratings required for backlight applications. Only 0.098 (2,49) high, they have a footprint of 0.26 x 0.175 (6,6 x 4,5). These inductors are constructed of high temp materials that provide excellent heat deflection to prevent damage during solder reflow. They are packaged on either 7″ or 13″ reels. Standard inductance values range from 1 to 6.8 mH and custom values are available to meet specific requirements. Coilcraft Designer’s Kit C135 contains samples of each of the standard parts shown. To order, contact Coilcraft or visit http://order.coilcraft.com. Typical Inductance vs. Current DataSheet4U.com Part number DO1607BL-105 DO1607BL-155 DO1607BL-225 DO1607BL-335 DO1607BL-475 DO1607BL-685 L1 ±20% (mH) 1.0 1.5 2.2 3.3 4.7 6.8 DCR2 Insulation max core-winding (Ohms) (MOhms) 19 21 42 52 80 125 >10 >10 >10 >10 >10 >10 DataShee Isat (mA) 100 75 60 50 45 40 3 I rms (mA) 150 140 100 90 75 60 4 1. Inductance tested at 0.1 Vrms, 100 kHz on Agilent/HP4192A. 2. DCR tested on Cambridge Technology 510-A with Coilcraft CCF-859 fixture. 3. Inductance drop = 10% typ. 4. ∆T = 40° rise typ. at Irms. 5. Operating temperature −40°C to +85°C. 6. Electrical specifications at 25°C. Parts/reel: 7″ 750; 13″ 2500 Tape width: 12 mm For packaging data see Tape and Reel Specifications section. DataSheet4U.com Specifications subject to change without notice. Doc...