DatasheetsPDF.com

H11N2-M Dataheets PDF



Part Number H11N2-M
Manufacturers Fairchild Semiconductor
Logo Fairchild Semiconductor
Description 6-PIN DIP HIGH SPEED LOGIC OPTOCOUPLERS
Datasheet H11N2-M DatasheetH11N2-M Datasheet (PDF)

6-PIN DIP HIGH SPEED LOGIC OPTOCOUPLERS H11N1-M PACKAGE H11N2-M H11N3-M SCHEMATIC ANODE 1 6 VCC 6 6 1 1 3 4 VO CATHODE 2 5 GND 6 1 DESCRIPTION The H11NX-M series has a high speed integrated circuit detector optically coupled to an AlGaAs infrared emitting diode. The output incorporates a Schmitt trigger, which provides hysteresis for noise immunity and pulse s haping. The detector circuit is optimized for simplicity of operation and utilizes an open collector output for maximum applicati.

  H11N2-M   H11N2-M


Document
6-PIN DIP HIGH SPEED LOGIC OPTOCOUPLERS H11N1-M PACKAGE H11N2-M H11N3-M SCHEMATIC ANODE 1 6 VCC 6 6 1 1 3 4 VO CATHODE 2 5 GND 6 1 DESCRIPTION The H11NX-M series has a high speed integrated circuit detector optically coupled to an AlGaAs infrared emitting diode. The output incorporates a Schmitt trigger, which provides hysteresis for noise immunity and pulse s haping. The detector circuit is optimized for simplicity of operation and utilizes an open collector output for maximum application flexibility. Truth Table Input H L Output L H FEATURES • • • • • • • • • • High data rate, 5 MHz typical (NRZ) Free from latch up and oscilliation throughout voltage and temperature ranges. Microprocessor compatible drive Logic compatible output sinks 16 mA at 0.5 V maximum Guaranteed on/off threshold hysteresis Wide supply voltage capability, compatible with all popular logic systems High common mode transient immunity, 2000 V/µs minimum Fast switching t r = 7.5ns typical, t f = 12ns typical Underwriter Laboratory (UL) recognized—file #E90700 VDE recognized – File#102497 – Add option V (e.g., H11N1VM) APPLICATIONS • • • • • • Logic to logic isolator Programmable current level sensor Line receiver—eliminate noise and transient problems A.C. to TTL conversion—square wave shaping Interfaces computers with peripherals Isolated power MOS driver for power supplies © 2003 Fairchild Semiconductor Corporation Page 1 of 9 4/14/03 6-PIN DIP HIGH SPEED LOGIC OPTOCOUPLERS H11N1-M H11N2-M H11N3-M ABSOLUTE MAXIMUM RATINGS Parameters TOTAL DEVICE Storage Temperature Operating Temperature Lead Solder Temperature Total Device Power Dissipation @ 25°C Derate Above 25°C EMITTER Continuous Forward Current Reverse Voltage Forward Current - Peak (1 µs pulse, 300 pps) LED Power Dissipation 25°C Ambient Derate Linearly From 25°C DETECTOR Detector Power Dissipation @ 25°C Derate Linearly from 25°C V45 Allowed Range V65 Allowed Range I4 Output Current PD VO VCC IO All All All All 150 1.76 0 to 16 0 to 16 50 mW mW/°C V V mA IF VR IF(pk) PD All All All All 30 6 1.0 120 1.41 mA V A mW mW/°C TSTG TOPR TSOL PD All All All All -55 to +150 -40 to +85 260 for 10 sec 250 2.94 °C °C °C mW mW/°C Symbol Device Value Units ELECTRICAL CHARACTERISTICS (TA = 0-70°C Unless otherwise specified.) INDIVIDUAL COMPONENT CHARACTERISTICS Parameters EMITTER Input Forward Voltage Reverse Current Capacitance DETECTOR Operating Voltage Range Supply Current Output Current, High *Typical values at TA = 25°C © 2003 Fairchild Semiconductor Corporation Test Conditions Symbol Device Min Typ* Max Units IF = 10 mA IF = 0.3 mA VR = 5 V V = 0, f = 1.0 MHz VF IR CJ VCC All All All 1.4 0.75 1.25 2 V 10 100 µA pF All All All 4 6 15 10 100 V mA µA IF = 0, VCC = 5V IF = 0.3mA, VCC = VO = 15V ICC(off) IOH Page 2 of 9 4/14/03 6-PIN DIP HIGH SPEED LOGIC OPTOCOUPLERS H11N1-M H11N2-M H11N3-M TRANSFER CHARACTERISTICS DC Characteristics Supply Current Output Voltage, low Test Conditions IF = 10mA, VCC = 5V RL=270Ω,VCC=5V, IF=IF(on) max. RL=270Ω, VCC = 5V note 1 RL=270Ω, VCC = 5V RL=270Ω, VCC = 5V Test Conditions Symbol ICC(on) VOL IF(on) IF(off) IF(off)/IF(on) Symbol Device All All H11N1-M H11N2-M H11N3-M Turn-Off Threshold Current Hysteresis Ratio AC Characteristics SWITCHING SPEED Propagation delay time High to Low Rise Time Propagation delay time Low to High Fall time Data Rate C=120pF, tP=1µs, RE: Note 2 Fig. 1 C=120pF, tP=1µs, RE: Note 2 Fig. 1 C=120pF, tP=1µs, RE: Note 2 Fig. 1 C=120pF, tP=1µs, RE: Note 2 Fig. 1 tPHL tr tPLH tf All All All All All 100 7.5 150 12 5 330 330 ns ns ns ns MHz All All Device 0.8 2.3 4.1 0.3 0.65 Min Typ 0.95 Max Units Min Typ* 6.5 Max 10 0.5 3.2 5 10 mA mA Units mA V Turn-On Threshold Current ISOLATION CHARACTERISTICS Parameters Input-Output Isolation Voltage Isolation Capacitance Isolation Resistance *Typical values at TA = 25°C NOTES: 1. Maximum IF(ON) is the maximum current required to trigger the output. For example, a 3.2mA maximum trigger current would require the LED to be driven at a current greater than 3.2mA to guarantee the device will turn on. A 10% guard band is recommended to account for degradation of the LED over its lifetime. The maximum allowable LED drive current is 30mA. 2. H11N1: RE = 910Ω H11N2: RE = 560Ω H11N3: RE = 240Ω Test Conditions f = 60 Hz, t =1 sec. VI-O = 0V, f = 1 MHz VI-O = ±500 VDC Symbol VISO CISO RISO 1011 Min 7500 0.4 0.6 Typ* Max Units VPEAK pF Ω © 2003 Fairchild Semiconductor Corporation Page 3 of 9 4/14/03 6-PIN DIP HIGH SPEED LOGIC OPTOCOUPLERS H11N1-M C IF RE VIN 1 H11N1-M 6 4 0.1µF RL H11N2-M H11N3-M I6 5V VIN 5V 50% 0 270Ω VO ton toff tr = tf ≤ 0.01µS Z = 50Ω 2 5 10% VO 90% tf tr Figure 1. Switching Test Circuit and Waveforms Figure 2. Transfer Characteristics 6 1.4 Figure 3. Threshold Current vs. Supply Voltage IF - NORMALIZED THRESHOLD CURRENT 5 VOH VCC = 5V RL = 270Ω TA = 25°C 1.2 1.0 0.8 TURN ON THRESHOLD D VO - OUTPUT VOLTAGE (V) 4 TURN OFF THRESHOL.


H11N2 H11N2-M H11N3-M


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)