BiMOS II UNIPOLAR STEPPER-MOTOR TRANSLATOR/DRIVER
5804
BiMOS II UNIPOLAR STEPPER-MOTOR TRANSLATOR/DRIVER
OUTPUT B 1 2 3 4 LOGIC GROUND OUTPUT 5 6 7 8 12 11 10 9 GROUND S...
Description
5804
BiMOS II UNIPOLAR STEPPER-MOTOR TRANSLATOR/DRIVER
OUTPUT B 1 2 3 4 LOGIC GROUND OUTPUT 5 6 7 8 12 11 10 9 GROUND STEP INPUT HALF-STEP ONE-PHASE
VDD
OE
16 15 14 13
SUPPLY OUTPUT ENABLE DIRECTION GROUND
KBD
OUTPUT D GROUND
Combining low-power CMOS logic with high-current and high-voltage bipolar outputs, the UCN5804B and UCN5804LB BiMOS II translator/ drivers provide complete control and drive for a four-phase unipolar steppermotor with continuous output current ratings to 1.25 A per phase (1.5 A startup) and 35 V. The CMOS logic section provides the sequencing logic, DIRECTION and OUTPUT ENABLE control, and a power-on reset function. Three stepper-motor drive formats, wave-drive (one-phase), two-phase, and halfstep are externally selectable. The inputs are compatible with standard CMOS, PMOS, and NMOS circuits. TTL or LSTTL may require the use of appropriate pull-up resistors to ensure a proper input-logic high. The wave-drive format consists of energizing one motor phase at a time in an A-B-C-D (or D-C-B-A) sequence. This excitation mode consumes the least power and assures positional accuracy regardless of any winding inbalance in the motor. Two-phase drive energizes two adjacent phases in each detent position (AB-BC-CD-DA). This sequence mode offers an improved torque-speed product, greater detent torque, and is less susceptible to motor resonance. Half-step excitation alternates between the one-phase and two-phase modes (A-AB-B-BC-C-CD-D-DA), providing an eight-...
Similar Datasheet