DatasheetsPDF.com

SML-210x Dataheets PDF



Part Number SML-210x
Manufacturers Rohm
Logo Rohm
Description Standard Type Mini-molded chip LEDs
Datasheet SML-210x DatasheetSML-210x Datasheet (PDF)

www.DataSheet4U.com Pure Green GaP 555nm Green Yellow Orange GaAsP on GaP Red GaAlAs on GaAs 650nm 660nm 570nm 585nm 610nm 2012 (0805) 2.0x1.25 t=0.8 SML-210PT SML-210MT SML-210YT SML-210DT SML-210VT SML-210LT PD mW SML-210PT SML-210MT SML-210YT SML-210DT SML-210VT SML-210LT Pure Green Green Yellow Orange Red Red 75 1/ 5,pulse width IF mA IFP mA VR V Topr °C Tstg °C Cathode mark 70 25 60 4 -30 to +85 -40 to +85 30 1ms. 75 Terminal IFP measured under duty DataSheet4U.com.

  SML-210x   SML-210x



Document
www.DataSheet4U.com Pure Green GaP 555nm Green Yellow Orange GaAsP on GaP Red GaAlAs on GaAs 650nm 660nm 570nm 585nm 610nm 2012 (0805) 2.0x1.25 t=0.8 SML-210PT SML-210MT SML-210YT SML-210DT SML-210VT SML-210LT PD mW SML-210PT SML-210MT SML-210YT SML-210DT SML-210VT SML-210LT Pure Green Green Yellow Orange Red Red 75 1/ 5,pulse width IF mA IFP mA VR V Topr °C Tstg °C Cathode mark 70 25 60 4 -30 to +85 -40 to +85 30 1ms. 75 Terminal IFP measured under duty DataSheet4U.com IV VF Typ. (V) SML-210PT SML-210MT SML-210YT SML-210DT SML-210VT SML-210LT 2.2 2.1 2.0 1.75 20 100 4 IF (mA) Max. (µA) Tolerance: 0.1 DataShee IR VR (V) λp Typ. (nm) 555 570 585 610 650 660 ∆λ Typ. (nm) IF (mA) Min. ( mcd) Typ. IF (mcd) (mA) 4 16 6.3 4 10 90° 100 50 0 50 90° 100 X’ Y’ 1.4 3.6 40 20 2.2 1.4 25 3.6 0° 30° 30° 20 60° 60° Relative brightness (Typ.) T86 3,000pcs reel 1.1 Lavel Position 1.25 Feeding direction DataSheet4U.com DataSheet 4 U .com 1.25 1.1 www.DataSheet4U.com et4U.com DataSheet4U.com DataShee DataSheet4U.com DataSheet 4 U .com www.DataSheet4U.com Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. et4U.com DataSheet4U.com The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 DataSheet4U.com DataSheet 4 U .com .


SML-210 SML-210x TL0201


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)