Document
www.DataSheet4U.com
PRODUCT
SPECIFICATION
DATE: 05/20/2004 NO. 61L04003 REV. 1 SHEET 1 OF 9
cosmo
ELECTRONICS CORPORATION
SMD LED :
KL195W03
Features
Package: 1.6x0.8x0.6mm(0603) standard package Feature of the device: extremely wide viewing angle; ideal for backlighting and coupling in light guides Wavelength: , 470nm(blue),570nm(Yellow green) Viewing angle: Extremely Wide( 130∘) Grouping parameter: luminous intensity Assembly methods: suitable for all SMT assembly methods Soldering methods: IR reflow soldering Taping: Package in 8mm tape on 7” diameter reel
Package Dimensions
PRODUCT
SPECIFICATION
DATE: 05/20/2004 NO. 61L04003 REV. 1 SHEET 2 OF 9
cosmo
ELECTRONICS CORPORATION
SMD LED :
KL195W03
Absolute Maximum Ratings At Ta = 25˚C
Parameter KL-195W03 B Power Dissipation 80 Peak Forward Current 100 (1/10 Duty Cycle, 0.1ms Pulse Width) Forward Current Reverse Voltage Operating Temperature Range Storage Temperature Range Wave Soldering Condition 30 5 -25˚C ~+ 80˚C -30˚C ~+ 85℃ 240˚C For 10 Seconds mA V mA 72 YG mW Unit
PRODUCT
SPECIFICATION
DATE: 05/20/2004 NO. 61L04003 SHEET 3 OF 9 REV. 1
cosmo
ELECTRONICS CORPORATION
SMD LED :
KL195W03
Electrical & Optical Characteristics At Ta = 25˚C
Parameter Luminous Intensity Blue Yellow Green Iv KL-195W03 6 2θ 1/2 λd Δλ VF Ir Blue/ Yellow Green Blue Yellow Green Blue Yellow Green Blue Yellow Green Blue/ Yellow Green 15 130 470 570 30 20 3.6 2.2 4 2.6 deg nm nm V Symbol PART NO Min. Typ. Max. Unit 15 30 mcd Test Condition IF = 20mA Note 1
Viewing Angle Dominant Wavelength Spectral Line Half-Width Forward Voltage Reverse Current
Note :
Note 2 IF = 20mA Note 3 IF = 20mA VR = 5V
100 μ A
1. Luminous intensity is measured with a photo detector and filter combination that follows the CIE ete - response curve. And the equipment measured luminous intensity torellance is ±5%. 2. θ1/2 is the off - axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, λd is derived from the CIE chromaticity diagram and represents the color of the device. 4. Caution in ESD:Static Electricity maybe cause damages to the LED. It is recommend to use a wrist band oranti - electrostatic glove when handing the LED. All devices, equipment and machinery must be properly grounded.
PRODUCT
SPECIFICATION
DATE: 05/20/2004 NO. 61L04003 SHEET 4 OF 9 REV. 1
cosmo
ELECTRONICS CORPORATION
SMD LED :
KL195W03
Test Condition IF=10mA VR=5V IF=10mA
The Reliability criteria of SMD LED
Item Forward Voltage Reverse Current Power Symbol VF IR PO Limit Min – – L.S.L*0.7 Max U.S.L*1.2 U.S.L*2.0 –
*U.S.L: Upper Standard Level *L.S.L: Lower Standard Level
Results of Reliability Test
NO Item Test Condition H:+100℃ 30min ∫ 5min L: -40℃ 30min Temp : 100℃ Temp : -40℃ IF: 20mA 60℃ / 90% RH Test Sample Ac / Re Hours/Cycles NO 100CYCES 11 PCS 0/1
1
Temperature Cycle
2 3 4 5
High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity
500HRS 500H.