AFC5-05D12-F

www.DataSheet4U.com AFC5-F SERIES Dual output Linear regulated outputs Very low output noise 2 x 1 x 0.375 inch package Six sided shielding Short circuit protection UL94V-0 case The AFC5-F Series of fixed frequency DC/DC converters provide 5 Watts of power, low output noise and tight output regulation, all housed within a 2 x 1 inch case. Six sided shielding to negate radiated noise and a non conductive base to prevent shorting to the PCB are standard features. Short circuit protection, isolation voltage of 500VDC, and a voltage accuracy of ±1% are included to offer the best possible solution to a system designer’s low power needs. Ideal applications for the AFC5-F are data acquisition, digital to analog and analog to digital conversion. AFC5-F Series DC/DC converters are suitable for a wide range of general industrial applications, especially where low noise levels are required. [ 2 YEAR WARRANTY ] SPECIFICATION OUTPUT SPECIFICATIONS Voltage accuracy Voltage balance Line regulation Load regulation Total error band Ripple and noise 5Hz to 20MHz Transient response Temperature coefficient Minimum output current Short circuit protection All specifications are typical at nominal input, full load at 25°C unless otherwise stated EMC CHARACTERISTICS ±1.0% Radiated emissions EN55022, EN55011, FCC Level A DataShee DataSheet4U.com ±1%, max. GENERAL SPECIFICATIONS LL to HL NL to FL See Note 2 ±0.5%, max. ±0.5% ±3.0% 15mV pk-pk, typ., 1mV rms, typ. 30mV pk-pk, max. 50% ...