(Datasheet) AFC5-05D15-F Datasheet PDF Download
• • • • • • Linear r egulated outputs Very low output noise 2 x 1 x 0.375 inch package Six sided sh ielding Short circuit protection UL94V- 0 case
The AFC5-F Series of fixed freq uency DC/DC converters provide 5 Watts of power, low output noise and tight ou tput regulation, all housed within a 2 x 1 inch case. Six sided shielding to n egate radiated noise and a non conducti ve base to prevent shorting to the PCB are standard features. Short circuit pr otection, isolation voltage of 500VDC, and a voltage accuracy of ±1% are incl uded to offer the best possible solutio n to a system designer’s low power ne eds. Ideal applications for the AFC5-F are data acquisition, digital to analog and analog to digital conversion. AFC5 -F Series DC/DC converters are suitable for a wide range of general industrial applications, especially where low noi se levels are required.
[ 2 YEAR WARRAN TY ]
OUTPUT SPECIFICATIONS Voltage accuracy Voltage balance Lin.
Keywords: AFC5-05D15-F, datasheet, pdf, Artesyn Technologies, AFC5-F, Series, DC/DC, CONVERTER, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent
[ 2 YEAR WARRANTY ]
• Linear regulated outputs
• Very low output noise
• 2 x 1 x 0.375 inch package
• Six sided shielding
• Short circuit protection
• UL94V-0 case
The AFC5-F Series of fixed frequency DC/DC converters provide 5 Watts of
power, low output noise and tight output regulation, all housed within a 2 x 1
inch case. Six sided shielding to negate radiated noise and a non conductive
base to prevent shorting to the PCB are standard features. Short circuit
protection, isolation voltage of 500VDC, and a voltage accuracy of ±1% are
included to offer the best possible solution to a system designer’s low power
needs. Ideal applications for the AFC5-F are data acquisition, digital to analog
and analog to digital conversion. AFC5-F Series DC/DC converters are suitable
for a wide range of general industrial applications, especially where low noise
levels are required.
SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated
Radiated emissions EN55022, EN55011, FCC
Level A DataShee
±1%D, mataaxS. heet4UG.EcNomERAL SPECIFICATIONS
LL to HL
64% to 70%
NL to FL
Input to output
Total error band
See Note 2
Switching frequency Fixed, See Note 3
Ripple and noise
5Hz to 20MHz
15mV pk-pk, typ.,
1mV rms, typ.
30mV pk-pk, max.
50% to 100% load step 50µs, max.
Minimum output current
Short circuit protection Output to common
+output to –output
Input voltage range
4.65V to 5.25VDC
10.8V to 13.2VDC
Black anodised aluminium
with non-conductive base
Operating, see curve 0°C to +105°C
–55°C to +125°C
Cooling Free-air convection cooled
5% to 95% RH
No damage, 5V nominal
No damage, 12V nominal
Vibration, See Note 4
5Hz to 500Hz
10,000 feet max.
40,000 feet max.
2.4G rms (approx.)
Reflected ripple current
DataSheet4 U .com