(SMTIR9901 / SMTIR9902) Infrared Sensors
www.DataSheet4U.com
Infrared sensor type: SMTIR9901/9902 Version : 3.1
SMTIR9901/02 INFRARED SENSORS
contactless measur...
Description
www.DataSheet4U.com
Infrared sensor type: SMTIR9901/9902 Version : 3.1
SMTIR9901/02 INFRARED SENSORS
contactless measurement of surface temperatures or Infrared radiation temperature measurement on moving objects. continuous temperature control of manufacturing. thermal alarm systems climate control medical instruments home appliances.
Typical applications
High accuracy High sensitivity (110 V/W) Low resistance (50 KΩ) and therefore Very good signal-to-noise-ratio Good response time (40 ms) Low cost thin film technology
Features
The Smartec infrared sensor SMTIR9901 and SMTIR9902 are sophisticated full silicon infrared sensors. The sensors can be used in measuring the radiation temperature without any contact. For the different radiation temperature ranges various filters are available. The sensor type SMTIR9902 containsDataSheet4U.com a temperature sensor for measuring the temperature of the sensor itself. The temperature range of the sensor-element is between - 40 to 100 ºC. The sensor is available in a standard TO-05 encapsulation and with a 5.5. µm. high pass filter. Easy and accurate measuring of the sensors temperature by means of a built-in temperature sensor (only for type SMTIR9902).
Introduction
DataShee
Pin-out and housing (TO 5) Sensor surface
SMTIR9902 1 = det 2 = det + 3 = NI1000 4 = NI1000/GND Ø 5.1 2 1 SMTIR9901 1 = det 2 = det + 3 = N.C. 4 = GND 4 45° 3 Bottom view
3.9
8.15
1.8 4.4
All sizes in mm.
DataSheet4U.com
SMARTEC BV, Delpratsingel 26
481...
Similar Datasheet