LED Drivers. AS1101 Datasheet

AS1101 Drivers. Datasheet pdf. Equivalent

Part AS1101
Description (AS1101 - AS1104) Low-Dropout LED Drivers
Feature www.DataSheet4U.com austriamicrosystems Data Sheet A S 11 0 1 , A S 11 0 2 , A S 11 0 3 , A S 11 0.
Manufacture AMSCO
Datasheet
Download AS1101 Datasheet

www.DataSheet4U.com austriamicrosystems Data Sheet A S 11 AS1101 Datasheet
Recommendation Recommendation Datasheet AS1101 Datasheet





AS1101
www.DataSheet4U.com
austriamicrosystems
AS1101, AS1102, AS1103, AS1104
Low-Dropout LED Drivers
Data Sheet
1 General Description
2 Key Features
The AS110x family are LED drivers providing matched
! LED Drivers for Parallel-Connected LEDs
current source bias for any color LED, including white
and blue. LED current is programmable using an exter-
nal resistor.
! Ultra-Low Voltage Drop: Less Than 150mV (for Li-
ion Battery Support)
! Analog and PWM Brightness Control
The AS1101 LED currents are typical 460 x ISET (per
LED) at an LED cathode voltage of 150mV and typical
650 x ISET at an LED cathode voltage of 1V.
! Up to 80mA per LED (AS1101)
! Up to 40mA per LED (AS1102, AS1103, AS1104)
! No Electromagnetic Interference, No Switching-
The AS1102, AS1103, and AS1104 LED currents are
Noise
typical 230 x ISET (per LED) at an LED cathode voltage
of 150mV and typical 325 x ISET at an LED cathode volt-
age of 1V where ISET is the current through the external
resistor connected to the CTRL pin.
! Current-Matching Requires No External Compo-
nents
! Active-Low Shutdown Mode (AS1101, AS1102,
and AS1103)
The AS110x family can drive up to 4 high-current LEDs.
! Low Shutdown-Current: Less Than 1µA
The AS1101, AS1102, and AS1104 incorporate a chip-
enable feature via pin ON. When the devices are dis-
abled, the supply current drops to less than 1µA.
The devices are pin-to-pin compatible to the FAN5611,
FAN5612 and FAN5614.
! SC70-6 Package (AS1101, AS1102, and AS1103)
! MSOP-8 Package (AS1104)
! Pin-to-Pin Compatible to FAN5611, FAN5612, and
FAN5614
The AS1101, AS1102, and AS1103 are available in a
3 Applications
6-pin SC70 package; the AS1104 is available in aD8a-tpainSheet4U.com
MSOP package.
The AS110x devices are ideal for LED displays and key-
board backlights, as well as lighting management units
for battery powered audio devices such as MP3 and CD
players, mobile and cordless phones, PDAs, portable
DVD players, and consumer electronics.
Figure 1. Typical Application Diagrams
DataShee
2 Diode Control with On/Off
VIN
3 Diode Control with On/Off
VIN
VSET(3V)
ENABLE
ISET
RSET
I1/I2 I3/I4
CTRL AS1101
ON GND
VSET(3V)
ENABLE
ISET
RSET
I3 I2 I1
CTRL AS1102
ON GND
4 Diode Control
VIN
VSET(3V)
ISET
RSET
I4 I3 I2
CTRL AS1103
GND
I1
4 Diode Control with On/Off
VIN
VSET(3V)
ENABLE
ISET
RSET
I4 I3 I2
CTRL AS1104
ON GND
I1
DataSheet4U.com
www.austriamicrosystems.com
DataSheet4 U .com
Revision 1.3
1 - 13



AS1101
www.DataSheet4U.com
AS1101, AS1102, AS1103, AS1104
Data Sheet
austriamicrosystems
Operating Conditions
et4U.com
4 Absolute Maximum Ratings
Stresses beyond those listed in Table 1 may cause permanent damage to the device. These are stress ratings only,
and functional operation of the device at these or any other conditions beyond those listed in Table 2 is not implied.
Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Table 1. Absolute Maximum Ratings
Parameter
Min Max Unit
Comment
VI1, VI2, VI3, VI4, CTRL and ON Voltage to GND -0.3
5
V
Power Dissipated by Device at TAMB = 85°C
200 mW
250 mW
SC70-6
MSOP-8
I1, I2, I3, I4 Steady State Current
100 mA
Package Body Temperature
260 °C
Junction Temperature
150 °C
Storage Temperature
-65 150 °C
Electrostatic Discharge Protection (ESD) Level 2
kV
Human Body Model;
Norm: MIL-STD883E 3015 methods.
The reflow peak soldering temperature (body temperature) is specified according to IPC/JEDEC J-STD-020C “Mois-
ture/Reflow Sensitivity Classification for Non-Hermetic Solid State Surface Mount Devices”.
4.1 Operating Conditions
Table 2. Recommended Operating Conditions DataSheet4U.com
Parameter
Min Typ Max Unit
LED Cathode Voltage
0.15 0.6 3.6
V
Enable Voltage ON Mode
2.2 3.0 3.6 V
Enable Voltage OFF Mode
0
0.2 0.5
V
Ambient Temperature
-40 25 85 °C
Not applicable to AS1103.
Comments
DataShee
DataSheet4U.com
www.austriamicrosystems.com
DataSheet4 U .com
Revision 1.3
2 - 13





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)