www.DataSheet4U.com
Axial Fiber Optic Isolator
OP1270 Series
Features:
• • • • •
Opaque plastic housings High noise im...
www.DataSheet4U.com
Axial Fiber Optic Isolator
OP1270 Series
Features:
Opaque plastic housings High noise immunity Visible Red LED with Phototranisitor Output 0.05” (1.27 mm) lead spacing Data Transfer through plastic fiber optic cable
Description: Each OPI1270 consists of a visible Red LED and a Photo
transistor sensor, which are housed in separate opaque molded plastic housings and coupled by plastic fiber optic cable. The heavy-duty opaque housing shields the optical signal from dust, making this series of devices ideal for dust contaminated environments. The OPI1270 series are designed for applications that require high voltage isolation between input and output. Depending on the length of the fiber optic cable, the emitter does not have to be optically in-line with the sensor. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information.
Ordering Information Applications: DataSheet4U.com Part LED Peak Lead Device Length Requiring High Voltage isolation between input and output Number Wavelength Length Electrical isolation in dirty environments 32mm (1.26”) OPI1270-032 0.45” Industrial equipment 40mm (1.57”) 645 nm OPI1270-040 (11.4 mm) Medical equipment 80mm (3.15”) OPI1270-080 Office equipment
Dash Number in mm 1 3
DataShee
2
4
Pin #
1 2
LED
Anode Cathode
Pin #
3 4
Transistor
Emitter Collector
RoHS DataSheet4U.com
OPTEK reserves the right to make changes at any time in o...