DatasheetsPDF.com

Gain Block. AG402-86 Datasheet

DatasheetsPDF.com

Gain Block. AG402-86 Datasheet






AG402-86 Block. Datasheet pdf. Equivalent




AG402-86 Block. Datasheet pdf. Equivalent





Part

AG402-86

Description

InGaP HBT Gain Block



Feature


www.DataSheet4U.com AG402-86 InGaP HBT Gain Block The Communications Edge TM Product Information Product Features x x x x x x x DC – 6000 MHz +17 dBm P1 dB at 900 MHz +32.5 dBm OIP3 at 900 MHz 15 dB Gain at 900 MHz Single Voltage S upply Green SOT-86 SMT Package Internal ly matched to 50 : Product Description The AG402-86 is a general-purpose buff er amplifier that of.
Manufacture

WJ Communications

Datasheet
Download AG402-86 Datasheet


WJ Communications AG402-86

AG402-86; fers high dynamic range in a low-cost su rface-mount package. At 900 MHz, the AG 402-86 typically provides 15 dB gain, + 32.5 dBm OIP3, and +17 dBm P1dB. The de vice combines dependable performance wi th consistent quality to maintain MTTF values exceeding 100 years at mounting temperatures of +85 qC & is housed in a SOT-86 (micro-X) industry-standard SMT lead-free/green/R.


WJ Communications AG402-86

oHScompliant package. The AG402-86 consi sts of Darlington pair amplifiers using the high reliability InGaP/GaAs HBT pr ocess technology and only requires DC-b locking capacitors, a bias resistor, an d an inductive RF choke for operation. The broadband MMIC amplifier can be dir ectly applied to various current and ne xt generation wireless technologies suc h as GPRS, GSM, CD.


WJ Communications AG402-86

MA, and W-CDMA. In addition, the AG402-8 6 will work for other various applicati ons within the DC to 6 GHz frequency ra nge such as CATV and fixed wireless. F unctional Diagram GND 4 RF In 1 3 RF Out 2 GND Applications x x x x x x Mobile Infrastructure CATV / DBS W-LAN / ISM RFID Defense / Homeland Security Fixed Wireless Function Input Output/B ias Ground Pin No.

Part

AG402-86

Description

InGaP HBT Gain Block



Feature


www.DataSheet4U.com AG402-86 InGaP HBT Gain Block The Communications Edge TM Product Information Product Features x x x x x x x DC – 6000 MHz +17 dBm P1 dB at 900 MHz +32.5 dBm OIP3 at 900 MHz 15 dB Gain at 900 MHz Single Voltage S upply Green SOT-86 SMT Package Internal ly matched to 50 : Product Description The AG402-86 is a general-purpose buff er amplifier that of.
Manufacture

WJ Communications

Datasheet
Download AG402-86 Datasheet




 AG402-86
www.DataSheet4U.com
AG402-86
InGaP HBT Gain Block
The Communications Edge TM
Product Information
Product Features
x DC – 6000 MHz
x +17 dBm P1dB at 900 MHz
x +32.5 dBm OIP3 at 900 MHz
x 15 dB Gain at 900 MHz
x Single Voltage Supply
x Green SOT-86 SMT Package
x Internally matched to 50 :
Applications
x Mobile Infrastructure
x CATV / DBS
x W-LAN / ISM
x RFID
x Defense / Homeland Security
x Fixed Wireless
Product Description
The AG402-86 is a general-purpose buffer amplifier that
offers high dynamic range in a low-cost surface-mount
package. At 900 MHz, the AG402-86 typically provides
15 dB gain, +32.5 dBm OIP3, and +17 dBm P1dB. The
device combines dependable performance with consistent
quality to maintain MTTF values exceeding 100 years at
mounting temperatures of +85 qC & is housed in a SOT-86
(micro-X) industry-standard SMT lead-free/green/RoHS-
compliant package.
The AG402-86 consists of Darlington pair amplifiers using
the high reliability InGaP/GaAs HBT process technology
and only requires DC-blocking capacitors, a bias resistor,
and an inductive RF choke for operation.
The broadband MMIC amplifier can be directly applied to
various current and next generation wireless technologies
such as GPRS, GSM, CDMA, and W-CDMA. In addition,
the AG402-86 will work for other various applications
within the DC to 6 GHz frequency range such as CATV
and fixed wireless.
Functional Diagram
GND
4
RF In 1
3 RF Out
2
GND
Function
Input
Output/Bias
Ground
Pin No.
1
3
2, 4
Specifications (1)
Typical Performance (1)
Parameter
Operational Bandwidth
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output IP3 (2)
Output IP2
Output P1dB
Noise Figure
Test Frequency
Gain
Output IP3 (2)
Output P1dB
Device Voltage
Device Current
Units
MHz
MHz
dB
dB
dB
dBm
dBm
dBm
dB
MHz
dB
dBm
dBm
V
mA
Min
DC
13.3
Typ
900
15.0
18
25
+17.1
+32.6
+46
3.7
1900
14.3
+29.6
+15.9
4.91
60
DM6a0ta0a0xSheet4U.cPForaemqruaemncyeter
S21
S11
S22
Output P1dB
Output IP3
Noise Figure
15.3
Units
MHz
dB
dB
dB
dBm
dBm
dB
500
15.2
-16
-28
+17.1
+33.3
3.7
Typical
900 1900
15.0 14.3
-18 -20
-25 -16
+17.1 +15.9
+32.6 +29.6
3.7 3.9
1. Test conditions: T = 25º C, Supply Voltage = +6 V, Rbias = 18.2 ¡ , 50 ¡ System.
2. 3OIP measured with two tones at an output power of 0 dBm/tone separated by 10 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
3. The junction temperature ensures a minimum MTTF rating of 1 million hours of usage.
DataShee
2140
14.0
-20
-16
+15.3
+28.2
3.9
Absolute Maximum Rating
Parameter
Rating
Operating Case Temperature
Storage Temperature
DC Voltage
-40 to +85 qC
-55 to +125 qC
+5 V
RF Input Power (continuous)
+10 dBm
Junction Temperature
+250q C
DataSheet4OUper.actioonmof this device above any of these parameters may cause permanent damage.
Ordering Information
Part No. Description
AG402-86*
AG402-86G
AG402-86PCB
InGaP HBT Gain Block
(lead-tin SOT-86 Pkg)
InGaP HBT Gain Block
(lead-free/green/RoHS-compliant SOT-86 Pkg)
700 – 2400 MHz Fully Assembled Eval. Board
* This package is being phased out in favor of the green package type which is backwards compatible for
existing designs. Refer to Product Change Notification WJPCN06MAY05TC1 on the WJ website.
Specifications and information are subject to change without notice
WJ Communications, Inc   Phone 1-800-WJ1-4401   FAX: 408-577-6621   e-mail: sales@wj.com   Web site: www.wj.com
Page 1 of 6 June 2005
DataSheet4 U .com




 AG402-86
www.DataSheet4U.com
AG402-86
InGaP HBT Gain Block
The Communications Edge TM
Product Information
Typical Device RF Performance
Supply Bias = 6 V, Rbias = 18.2 :, Icc = 60 mA
Frequency
S21
S11
S22
Output P1dB
Output IP3
Noise Figure
MHz
dB
dB
dB
dBm
dBm
dB
100
15.3
-18
-23
+17.1
+33.6
3.7
500
15.2
-16
-28
+17.1
+33.3
3.7
900
15.0
-18
-25
+17.1
+32.6
3.7
1900
14.3
-20
-16
+15.9
+29.6
3.9
2140
14.0
-20
-16
+15.3
+28.2
3.9
2400
13.8
-20
-16
+14.7
+27.3
4.0
3500
13.0
-20
-17
+11.9
4.0
5800
10.7
-16
-13
1. Test conditions: T = 25º C, Supply Voltage = +6 V, Device Voltage = 4.91 V, Rbias = 18.2 ¡ , Icc = 60 mA typical, 50 ¡ System.
2. 3OIP measured with two tones at an output power of 0 dBm/tone separated by 10 MHz. The suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
3. Data is shown as device performance only. Actual implementation for the desired frequency band will be determined by external components shown in the application circuit.
et4U.com
Gain vs. Frequency
16
14
12
10
8
-40 C +25 C +85 C
6
0123
Frequency (GHz)
Output IP3vs. Frequency
40
Return Loss
0
I-V Curve
100
-10
80
Optimal operatingpoint
60
-20
40
-30
S11 S22
-40
4 012345
DataSFhreeqeuetn4cUy (.GcHoz)m
6
20
0
3.0 3.4 3.8 4.2 4.6 5.0 5.4
Device Voltage (V)
Output IP2vs. Frequency
50
NoiseFigurevs. Frequency
5
35 45
30 40
25 35
-40 C
+25 C
+85 C
20 30
0 0.5 1 1.5 2 2.5 3
0
Frequency (GHz)
4
3
2
-40c +25c +85c
1
-40 C
+25 C
+85 C
0
200 400 600 800 1000
0 0.5 1 1.5 2 2.5 3
Frequency (MHz)
Frequency (GHz)
DataShee
P1dBvs. Frequency
20
15
10
5
-40 C
+25 C
+85 C
0
0 0.5 1 1.5 2 2.5 3 3.5 4
Frequency (GHz)
Output Power / Gain vs. Input Power
16
frequency = 900 MHz
20
14 Gain
16
12 12
10 8
8
Output Power
6
-12 -8 -4 0 4
Input Power (dBm)
4
0
8
Output Power / Gain vs. Input Power
14
frequency = 2000 MHz
20
12 Gain
10
16
12
88
6
Output Power
4
-12 -8
-4
0
4
Input Power (dBm)
4
0
8
DataSheet4U.com
Specifications and information are subject to change without notice
WJ Communications, Inc   Phone 1-800-WJ1-4401   FAX: 408-577-6621   e-mail: sales@wj.com   Web site: www.wj.com
Page 2 of 6 June 2005
DataSheet4 U .com




 AG402-86
www.DataSheet4U.com
AG402-86
InGaP HBT Gain Block
The Communications Edge TM
Product Information
et4U.com
Typical Device RF Performance (cont’d)
Supply Bias = +8 V, Rbias = 51 :, Icc = 60 mA
Gain vs. Frequency
16
Output IP3vs. Frequency
40
Output IP2vs. Frequency
50
14 35 45
12
10
8
-40 C
+25 C
+85 C
6
0123
Frequency (GHz)
30 40
25 35
-40 C
+25 C
+85 C
-40c +25c +85c
20 30
4 0 0.5 1 1.5 2 2.5 3 0 200 400 600 800 1000
Frequency (GHz)
Frequency (MHz)
P1dBvs. Frequency
20
NoiseFigurevs. Frequency
5
15 4
3
10
2
5
-40 C
+25 C
+85 C
0
1
-40 C
+25 C
0
0 0.5 1 1.5 2 2.5 3 3.5 4
0 0.5 1 1.5 2
Frequency(GHz) DataSheet4U.com
Frequency (GHz)
+85 C
2.5
3
DataShee
Vcc
Icc = 60 mA
Application Circuit
R1
Bias
Resistor
C4
Bypass
Capacitor
C3
0.018 µF
RF IN
C1
Blocking
Capacitor
L1
RF Choke
AG402-86
RF OUT
C2
Blocking
Capacitor
Recommended Component Values
Reference
Frequency (MHz)
Designator
50
500 900 1900 2200 2500
L1 820 nH 220 nH 68 nH 27 nH 22 nH 18 nH
C1, C2, C4 .018 µF 1000 pF 100 pF 68 pF 68 pF 56 pF
1. The proper values for the components are dependent upon the intended frequency of operation.
2. The following values are contained on the evaluation board to achieve optimal broadband performance:
Ref. Desig. Value / Type
Size
L1 39 nH wirewound inductor 0603
C1, C2
56 pF chip capacitor
0603
DataSheet4U.com
C3
C4
R1
0.018 PF chip capacitor
Do Not Place
18.2 : 1% tolerance
0603
0805
3500
15 nH
39 pF
Recommended Bias Resistor Values
S upply
Voltage
R1 value
Size
6V
7V
8V
9V
10 V
12 V
18.2 ohms
34.8 ohms
52 ohms
68 ohms
85 ohms
118 ohms
0805
1206
1210
1210
2010
2010
The proper value for R1 is dependent upon the supply
voltage and allows for bias stability over temperature.
WJ recommends a minimum supply bias of +6 V. A
1% tolerance resistor is recommended.
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com Web site: www.wj.com
¢
¢¢
¢
Page 3 of 6 June 2005
DataSheet4 U .com



Recommended third-party AG402-86 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)