DatasheetsPDF.com

MB89636 Dataheets PDF



Part Number MB89636
Manufacturers Fujitsu Media Devices
Logo Fujitsu Media Devices
Description (MB89630 Series) 8-bit Proprietary Microcontroller
Datasheet MB89636 DatasheetMB89636 Datasheet (PDF)

www.DataSheet4U.com FUJITSU SEMICONDUCTOR DATA SHEET DS07-12515-2E 8-bit Proprietary Microcontroller CMOS F2MC-8L MB89630 Series MB89635/T635/636/637/T637/P637/W637/PV630 s DESCRIPTION The MB89630 series has been developed as a general-purpose version of the F2MC*-8L family consisting of proprietary 8-bit, single-chip microcontrollers. In addition to a compact instruction set, the microcontrollers contain a variety of peripheral functions such as dual-clock control system, five operating spe.

  MB89636   MB89636



Document
www.DataSheet4U.com FUJITSU SEMICONDUCTOR DATA SHEET DS07-12515-2E 8-bit Proprietary Microcontroller CMOS F2MC-8L MB89630 Series MB89635/T635/636/637/T637/P637/W637/PV630 s DESCRIPTION The MB89630 series has been developed as a general-purpose version of the F2MC*-8L family consisting of proprietary 8-bit, single-chip microcontrollers. In addition to a compact instruction set, the microcontrollers contain a variety of peripheral functions such as dual-clock control system, five operating speed control stages, a UART, timers, a PWM timer, a serial interface, an A/D converter, an external interrupt, and a watch prescaler. *: F MC stands for FUJITSU Flexible Microcontroller. DataSheet4U.com 2 DataShee s FEATURES • High-speed operating capability at low voltage • Minimum execution time: 0.4 µs/3.5 V, 0.8 µs/2.7 V • F2MC-8L family CPU core Multiplication and division instructions 16-bit arithmetic operations Test and branch instructions Bit manipulation instructions, etc. Instruction set optimized for controllers • Five types of timers 8-bit PWM timer: 2 channels (Also usable as a reload timer) 8-bit pulse-width count timer (Continuous measurement capable, applicable to remote control, etc.) 16-bit timer/counter 21-bit time-base timer • UART CLK-synchronous/CLK-asynchronous data transfer capable (6, 7, and 8 bits) • Serial interface Switchable transfer direction to allows communication with various equipment. • 10-bit A/D converter Activation by an external input capable (Continued) DataSheet4U.com DataSheet 4 U .com www.DataSheet4U.com MB89630 Series (Continued) • External interrupt: 4 channels Four channels are independent and capable of wake-up from low-power consumption modes (with an edge detection function). • Low-power consumption modes Stop mode (Oscillation stops to minimize the current consumption.) Sleep mode (The CPU stops to reduce the current consumption to approx. 1/3 of normal.) Subclock mode Watch mode • Bus interface function With hold and ready function s PACKAGE 64-pin Plastic SH-DIP 64-pin Plastic QFP 64-pin Plastic QFP et4U.com DataShee (DIP-64P-M01) DataSheet4U.com (FPT-64P-M06) (FPT-64P-M09) 64-pin Ceramic SH-DIP 64-pin Ceramic MDIP 64-pin Ceramic MQFP (DIP-64C-A06) (MDP-64C-P02) (MQP-64C-P01) DataSheet4U.com 2 DataSheet 4 U .com www.DataSheet4U.com MB89630 Series s PRODUCT LINEUP Part number Parameter MB89635 MB89636 MB89637 MB89T635 MB89T637 MB89P637 MB89W637 MB89PV630 Piggyback/ evaluation product (for evaluation and development) Classification Mass production products (mask ROM products) ROM size 16 K × 8 bits (internal mask ROM) External ROM products One-time PROM product EPROM product 24 K × 8 bits (internal mask ROM) 32 K × 8 bits (internal mask ROM) Fixed to external ROM 512 × 8 bits 32 K × 8 bits (Internal PROM, programming with general-purpose EPROM programmer) 32 K × 8 bits (external ROM) RAM size 512 × 8 bits 768 × 8 bits 1024 × 8 bits 1024 × 8 bits CPU functions Number of instructionns: Instruction bit length: Instruction length: Data bit length: Minimum execution time: Interrupt processing time: 136 8 bits 1 to 3 bytes 1, 8, 16 bits 0.4 to 6.4 µs/10 MHz, 61 µs/32.768 kHz 3.6 to 57.6 µs/10 MHz, 562.5 µs/32.768 kHz et4U.com Ports Input ports: 5 (All also serve as peripherals.) Output ports (N-ch open-drain): 8 (All also serve as peripherals.) I/O ports (N-ch open-drain): 4 (All also serve as peripherals.) DataSheet4U.com Output ports (CMOS): 8 (All also serve as bus control.) I/O ports (CMOS): 28 (27 ports also serve as bus pins and peripherals.) Total: 53 21 bits × 1 (in main clock)/15 bits × 1 (at 32.768 kHz) 8-bit reload timer operation (toggled output capable, operating clock cycle: 0.4 µs to 3.3 ms) × 2 channels 7/8-bit resolution PWM operation (conversion cycle: 51.2 µs to 839 ms) × 2 channels 8-bit timer operation (overflow output capable, operating clock cycle: 0.4 to 12.8 µs) 8-bit reload timer operation (toggled output capable, operating clock cycle: 0.4 to 12.8 µs) 8-bit pulse width measurement operation (continuous measurement capable, measurement of “H” pulse width/ “L” pulse width/ from ↑ to ↑/from ↓ to ↓ capable) 16-bit timer operation (operating clock cycle: 0.4 µs) 16-bit event counter operation (rising edge/falling edge/both edge selectability) 8 bits LSB first/MSB first selectability One clock selectable from four transfer clocks (one external shift clock, three internal shift clocks: 0.8 µs, 3.2 µs, 12.8 µs) Switching two I/O systems by software capable Transfer data length (6, 7, and 8 bits) Transfer rate (300 to 62500 bps. at 10 MHz osciliation) 10-bit resolution × 8 channels A/D conversion mode (conversion time: 13.2 µs) Sense mode (conversion time: 7.2 µs) Continuous activation by an external activation or an internal timer capable DataShee Clock timer 8-bit PWM timer 8-bit pulse width count timer 16-bit timer/ counter 8-bit serial I/O UART 10-bit A/D converter (Continued) DataSheet4U.com 3 DataS.


MB89T635 MB89636 MB89655AR


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)