Document
www.DataSheet4U.com
POWER SOLUTION - DBL
Lead Free
TO126 20W HIGH POWER RESISTORS
RNP-10S
Features and Applications
Small 20Watt high power resistor in TO-126 package with 5.9 C/W heat resistance from hot spot to flange. Non-Inductive, fit for high speed SW power sources, high precision CRT and high-speed pulse handling circuits. Thin style in small package suits high density installation of electronic instruments. Superior vibration durability with heat sink mounting. Complete thermal flow design available. Color video amplifier of CRTs, emitter resistors of power SW circuits, snubber circuits, VHF amplifiers, load resistor of pulse generators.
Dimensions
3.8 8.5 3.1 dia.3.1
Between flange and resistor are insulated.
Leads, Tin plated Cu Molding, epoxy Conductor, Cu Resistor, NiCr Substrate, Alumina Flange, Ni plated Cu
DataSheet4U.com
12.0
DataShee
1.4 0.6 5.08 1.9 0.5 15.0 12.0 (mm)
Specifications and Performances
Items Rating Power Rating Power Hear resistance Resistance Range Nominal Resistance TCR Tolerance Operation Temp. Range Withstanding Voltage Load Life Humidity Soldering Heat Solder ability Insulation Resistance Vibration Specification-Performance 20 Watts 1 Watt 5.9 C/W 1.0-9.1ohm 10-220ohm E24 E24 +/-100 ppm/C(A) +/-50 ppm/C(C) +/-5%(J) +/-1%(F) -55 C to +155 C 2000 Volt DC +/-(1.0 %+0.05ohm) +/-(1.0 %+0.05ohm) +/-(1.0 %+0.05ohm) Over 3/4 of surface Over 1000 Meg ohm +/-(0.25 %) Test Conditions Flange temperature of -55 C to +25 C Free air (without heat sink). From hot spot to flange. Up to 51kohm resistance are available. Flange temperature -55 to +155 C
15.2
101 CF 4X
Note(6)
60 seconds, between terminals and flange. 25C, 90 min.ON, 30min.OFF, 1000hours. 60C, 90 to 95%RH, DC0.1W, 1000hours. 350+/-5C, 3seconds, 230+/-5C, 3seconds. Between terminals and flange.
DataSheet4U.com
DataSheet 4 U .com
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
www.DataSheet4U.com
POWER SOLUTION – DBL
HIGH POWER RESISTORS
Ordering Information
Identification RNP10SC500F000 RNP10SC500FZ00 RNP10SC101F010 RNP10SC101FZ10 RNP10SA0R1J000 Type RNP10S RNP10S RNP10S RNP10S RNP10S TC C(50ppm/C) C(50ppm/C) C(50ppm/C) C(50ppm/C) A(100ppm/C) Resistance 50ohm 50ohm 100ohm 100ohm 0.1ohm Tolerance F(1%) F(1%) F(1%) F(1%) J(5%)
Lead Free
RNP-10S
Code 000 Z00 (Z: Lead-free) 010 Z10(Z: Lead-free) 000
Derating Curve
Rating Power(W), with 2.8K/W heat sink. 10 8 6 4 2 0 -50 0 50 100 150
+155C +25C
Temperature Rise at flange
Temperature(C) 140 120 100 80 60 40 20 10 Power (W) 20 0 200 DataSheet4U.com 0 Flange Temperature (C)
et4U.com
Frequency Characteristics
Impedance (ohm) 1K RNP-10S C1K0F 100 RNP-10S C101F RNP-10S C500F RNP-10S C100F RNP-10S C5R0F
One time rectangular impulse.
Pulse Peak Watt (Watts) 10K RNP-10CS100F 1K
10
100
1
100k
1M
10M
100M 1G Frequency(Hz)
10G
10
1µ
10µ
100µ
1m 10m 100m Pulse Width (seconds)
Notes (1) Insulating material will not be used betw.