Document
www.DataSheet4U.com
VG95234
Connectors
Mounting dimensions
Mounting Holes
Mounting holes for wall mounting receptacles style A, B1, B2, C1, C2, J1, J2, N1 and N2 acc. to VG95234 e
d1 e
d2
DataSheet4U.com
ee DataSh
d1 H12 Shell Size Style A Style B1, B2 C1, C2, J1, J2 N1, N2 18.50 (.728) 21.70 (.854) 24.90 (.980) 27.70 (1.091) 27.70 (1.091) 31.10 (1.224) 34.50 (1.358) 37.80 (1.488) 41.30 (1.626) 47.10 (1.854) 53.80 (2.118) 60.00 (2.362) Style A, B2, C2 J2, N2
d2 H13 Style B1, C1, J1, N1 4.50 (.177) 4.50 (.177) 4.50 (.177) 4.50 (.177) 4.50 (.177) 4.50 (.177) 4.50 (.177) 4.50 (.177) 4.50 (.177) 5.50 (.217) 5.50 (.217) 5.50 (.217)
e 0.15(.006)
d2 Screw To Be Used Style A, B2, C2, J2 N2 M3...DIN 85 M3...DIN 85 M3...DIN 85 M3...DIN 85 M3...DIN 85 M3...DIN 85 M3...DIN 85 M3...DIN 85 M3.5...DIN 85 M3.5...DIN 85 M4...DIN 85 M4...DIN 85 Style B1, C1, J1, N M4...DIN 84 M4...DIN 84 M4...DIN 84 M4...DIN 84 M4...DIN 84 M4...DIN 84 M4...DIN 84 M4...DIN 84 M4...DIN 84 M5...DIN 84 M5...DIN 84 M5...DIN 84
10SL 12S 14S 16S 16 18 20 22 24 28 32 36
16.40 (.646) 16.40 (.646) 19.70 (.776) 22.90 (.902) 22.90 (.902) 26.10 (1.028) 29.50 (1.161) 32.70 (1.287) 36.00 (1.417) 42.00 (1.654) 48.30 (1.902) 54.60 (2.150)
3.40 (.134) 3.40 (.134) 3.40 (.134) 3.40 (.134) 3.40 (.134) 3.40 (.134) 3.40 (.134) 3.40 (.134) 3.90 (.154) 3.90 (.154) 4.50 (.177) 4.50 (.177)
18.20 (.717) 20.60 (.811) 23.00 (.906) 24.60 (.969) 24.60 (.969) 27.00 (1.063) 29.40 (1.157) 31.80 (1.252) 34.90 (1.374) 39.70 (1.563) 44.50 (1.752) 49.20 (1.937)
When used with safety elements the max. outer diameter must not exceed the outer diameter of the screw head.
DataSheet4U.com
SUNGJIN CONNECTOR & CONNECTION TECHNOLOGIES
TEL : 82-31-318-0942 FAX : 82-31-318-0945 www.sjcnt.co.kr
DataSheet 4 U .com
44
www.DataSheet4U.com
VG95234
Connectors
Mounting dimensions
Harnessing
VG95234 connectors are designed for single wire harnessing. Full sealing will be guaranteed only by using wires in accordance with MIL-W-5086, LN9251(for AWG) and TL6145-009 and TL-6145-011(for metric wires). All other wires have to conform to wire and insulation diameters with the data given in the following table:
AWG Contact Size Metric Crimp-and Solder contacts AWG Metric Insulation Metric mm 2.20-2.50 2.20-2.80 3.10-3.50 4.40-4.90 5.90-6.50 7.10-7.70 12.10-12.80
AWG
16S / 15S 12 8 4 0
10 16/15 25 60 100 160 500
16 12 8 4 0
0.75-1.00 0.75-1.50 2.50 6.00 10.00 16.00
2.20-2.80 3.10-3.50 5.50-6.50 8.50-9.40 11.50-13.00
m et4U.co
DataSheet4U.com
50.00
1. ALL DIMENSIONS ARE MILLIMETERS.
Wire Stripping
Either mechanical or hot stripping can be used. Prevent condoctor or insulator damage. For solder contacts, conductors have to be pretinned. Note : Do not twist conductors used with crimp contacts. Do not touch uninsulated conductors before crimping. Twisting of conductors and grease or lubricants on the wires cause poor crimp quallity.
Contact Size Metric 10 16 / 15 25 60 / 100 160 500 Stripping Length mm 4.00 6.20 11.80 11.80 11.80 13.70
AWG 16S / 15s 12 8 4 0
1. ALL DIMENSIONS ARE MILLIMETERS.
DataSheet4U.com
SUNGJIN CONNECTOR & CONNECTION TECHNOLOGIES
TEL : 82-31-318-0942 FAX : 82-31-318-0945 www.sjcnt.co.kr
DataSheet 4 U .com
45
.