100MHz Current Feedback Amplifier
Semiconductor
T UCT ROD ACEMEN 47 P E 7 T L 7 E P 42 OL RE 00-4 m OBS ENDED 8 1 s.co MM ions ECO pplicat p@harri R Janu...
Description
Semiconductor
T UCT ROD ACEMEN 47 P E 7 T L 7 E P 42 OL RE 00-4 m OBS ENDED 8 1 s.co MM ions ECO pplicat p@harri R January 1999 O A l N ap entraail: cent C l l Ca or em
HA-5004
File Number 2923.4
100MHz Current Feedback Amplifier
The HA-5004 current feedback amplifier is a video/wideband amplifier optimized for low gain applications. The design is based on current-mode feedback which allows the amplifier to achieve higher closed loop bandwidth than voltage-mode feedback operational amplifiers. Since feedback is employed, the HA-5004 can offer better gain accuracy and lower distortion than open loop buffers. Unlike conventional op amps, the bandwidth and rise time of the HA-5004 are nearly independent of closed loop gain. The 100MHz bandwidth at unity gain reduces to only 65MHz at a gain of 10. The HA-5004 may be used in place of a conventional op amp with a significant improvement in speed power product. Several features have been designed in for added value. A thermal overload feature protects the part against excessive junction temperature by shutting down the output. If this feature is not needed, it can be inhibited via a TTL input (TOI). A TTL chip enable/disable (OE) is also provided; when the chip is disabled its output is high impedance. Finally, an open collector output flag (TOL) is provided to indicate the status of the chip. The status flag goes low to indicate when the chip is disabled due to either the internal Thermal Overload shutdown or the external disable. In or...
Similar Datasheet