IL610

www.DataSheet4U.com IL610 IL611 IL612 IL613 IL614 Passive Input Digital Isolators Functional Diagram Features 40 Mbps Data Rate Very Wide Input Voltage Range Open Drain or CMOS Outputs Failsafe Output (Logic high output for zero coil current ) Output Enable 3.3 V or 5 V Power Supply 2500 VRMS Isolation (1 Minute) Low Power Dissipation -40°C to 85°C Temperature Range 20 kV/µs Typical Common Mode Rejection UL1577 & IEC61010 Approval (pending) Available in MSOP, SOIC, and PDIP Packages and as Bare Die Applications CAN Bus/ Device Net General Purpose Opto Replacement Wired-OR Alarms SPI interface DataSheet4U.com I2C RS 485, RS422, RS232 Digital Fieldbus Size critical multi-channel applications Description The IL600 series are isolated signal couplers with CMOS or open drain transistor outputs which can be used to replace opto-couplers in many standard isolation functions. The devices are manufactured with NVE’s patented IsoLoop® GMR sensor technology giving exceptionally small size and low power dissipation. A single resistor is used to set maximum input current for input voltages above 0.5 V. The devices are available in SOIC, PDIP and MSOP packages and as bare die. DataShee Isoloop® is a registered trademark of NVE Corporation. *U.S. Patent number 5,831,426; 6,300,617 and others. DataSheet4U.com ISB-DS-001-IL612-A, January 20, 2005 NVE Corp., 11409 Valley View Road, Eden Prairie, MN 55344-3617, U.S.A. Telephone: 952-829-9217, Fax 952...