DatasheetsPDF.com

HA1-2539-5 Dataheets PDF



Part Number HA1-2539-5
Manufacturers Intersil Corporation
Logo Intersil Corporation
Description 600MHz/ Very High Slew Rate Operational Amplifier
Datasheet HA1-2539-5 DatasheetHA1-2539-5 Datasheet (PDF)

HA-2539 Data Sheet September 1998 File Number 2896.3 600MHz, Very High Slew Rate Operational Amplifier The Intersil HA-2539 represents the ultimate in high slew rate, wideband, monolithic operational amplifiers. It has been designed and constructed with the Intersil High Frequency Bipolar Dielectric Isolation process and features dynamic parameters never before available from a truly differential device. With a 600V/µs slew rate and a 600MHz gain bandwidth product, the HA-2539 is ideally suited f.

  HA1-2539-5   HA1-2539-5


Document
HA-2539 Data Sheet September 1998 File Number 2896.3 600MHz, Very High Slew Rate Operational Amplifier The Intersil HA-2539 represents the ultimate in high slew rate, wideband, monolithic operational amplifiers. It has been designed and constructed with the Intersil High Frequency Bipolar Dielectric Isolation process and features dynamic parameters never before available from a truly differential device. With a 600V/µs slew rate and a 600MHz gain bandwidth product, the HA-2539 is ideally suited for use in video and RF amplifier designs, in closed loop gains of 10 or greater. Full ±10V swing coupled with outstanding AC parameters and complemented by high open loop gain makes the devices useful in high speed data acquisition systems. For further design assistance please refer to Application Note AN541 (Using the HA-2539 Very High Slew Rate Wideband Operational Amplifiers) and Application Note AN556 (Thermal Safe-Operating-Areas For High Current Operational Amplifiers. For military grade product information, the HA-2539/883 data sheet is available upon request. Features • Very High Slew Rate . . . . . . . . . . . . . . . . . . . . . . 600V/µs • Open Loop Gain . . . . . . . . . . . . . . . . . . . . . . . . . . 15kV/V • Wide Gain-Bandwidth (AV ≥ 10) . . . . . . . . . . . . . . 600MHz • Power Bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . 9.5MHz • Low Offset Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . 8mV • Input Voltage Noise . . . . . . . . . . . . . . . . . . . . . . 6nV/√Hz • Output Voltage Swing . . . . . . . . . . . . . . . . . . . . . . . . ±10V • Monolithic Bipolar Dielectric Construction Applications • Pulse and Video Amplifiers • Wideband Amplifiers • High Speed Sample-Hold Circuits • RF Oscillators Pinout HA-2539 (PDIP, CERDIP) TOP VIEW Ordering Information PART NUMBER HA1-2539-2 HA1-2539-5 HA3-2539-5 TEMP. RANGE (oC) -55 to 125 0 to 75 0 to 75 PACKAGE 14 Ld CERDIP 14 Ld CERDIP 14 Ld PDIP PKG. NO. F14.3 F14.3 E14.3 +IN 1 NC 2 V- 3 NC 4 NC 5 NC 6 NC 7 14 -IN + NOTE: No-Connection (NC) leads may be tied to a ground plane for better isolation and heat dissipation. 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999 - 13 NC 12 NC 11 NC 10 +V 9 NC 8 OUTPUT HA-2539 Absolute Maximum Ratings Supply Voltage Between V+ and V- Terminals. . . . . . . . . . . . . . 35V Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V Peak Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA Continuous Output Current . . . . . . . . . . . . . . . . . . . . . . . 33mARMS Thermal Information Thermal Resistance (Typical, Note 2) θJA (oC/W) θJC (oC/W) CERDIP Package. . . . . . . . . . . . . . . . . 75 20 PDIP Package . . . . . . . . . . . . . . . . . . . 107 N/A Maximum Internal Quiescent Power Dissipation (Note 1) Maximum Junction Temperature (Ceramic Package) . . . . . . .175oC Maximum Junction Temperature (Plastic Package) . . . . . . . . .150oC Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300oC Operating Conditions Temperature Range HA-2539-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -55oC to 125oC HA-2539-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0oC to 75oC CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. NOTES: 1. Maximum power dissipation with load conditions must be designed to maintain the maximum junction temperature below 175oC for the ceramic package and below 150oC for the plastic package. By using Application Note AN556 on Safe Operating Area equations, along with the thermal resistances, proper load conditions can be determined. Heat sinking is recommended above 75oC. 2. θJA is measured with the component mounted on an evaluation PC board in free air. Electrical Specifications VSUPPLY = ±15V, RL = 1kΩ, CL < 10pF, Unless Otherwise Specified TEMP. (oC) HA-2539-2 MIN TYP MAX MIN HA-2539-5 TYP MAX UNITS PARAMETER INPUT CHARACTERISTICS Offset Voltage 25 Full ±10.0 - 8 13 20 5 1 10 1 6 6 10 15 20 25 6 8 - ±10.0 - 8 13 20 5 1 10 1 6 6 15 20 20 25 6 8 - mV mV µV/oC µA µA µA µA kΩ pF V pA/√Hz nV/√Hz Average Offset Voltage Drift Bias Current Full 25 Full Offset Current 25 Full Input Resistance Input Capacitance Common Mode Range Input Current Noise (f = 1kHz, RSOURCE = 0Ω) Input Voltage Noise (f = 1kHz, RSOURCE = 0Ω) TRANSFER CHARACTERISTICS Large Signal Voltage Gain (Note 3) Common Mode Rejection Ratio (Note 4) Minimum Stable Gain Gain Bandwidth (Notes 5, 6) OUTPUT CHARACTERISTICS Output Voltage Swing (Notes 3, 10) Out.


HA1-2539-2 HA1-2539-5 HA1-2540-2


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)