HA1-5320883

HA5320/883 July 1994 High Speed Precision Sample and Hold Amplifier Description The HA-5320/883 was designed for use in precision, high speed data acquisition systems. The circuit consists of an input transconductance amplifier capable of providing large amounts of charging current, a low leakage analog switch, and an output integrating amplifier. The analog switch sees virtual ground as its load; therefore, charge injection on the hold capacitor is constant over the entire input/ output voltage range. The pedestal voltage resulting from this charge injection can be adjusted to zero by use of the offset adjust inputs. The device includes a hold capacitor. However, if improved droop rate is required at the expense of acquisition time, additional hold capacitance may be added externally. This monolithic device is manufactured using the Intersil Dielectric Isolation Process, minimizing stray capacitance and eliminating SCR’s. This allows higher speed and latch-free operation. For further information, please see Application Note AN538. Features This Circuit is Processed in Accordance to MIL-STD883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. Gain, DC . . . . . . . . . . . . . . . . . . . . . . . . 2 x 106 V/V (Typ) Acquisition Time . . . . . . . . . . . . . . . 1.0µs (0.01%) (Typ) Droop Rate . . . . . . . . . . . . . . . . 0.08µV/µs (+25oC) (Typ) 17µV/µs (Full Temperature) (Typ) Aperture Time. . . . . . . . . . . . . . . . . . . . . . . . . 25...