RPM971-H14

www.DataSheet4U.com RPM971-H14 Photo Link Module IrDA Infrared Communication Module RPM971-H14 RPM971-H14 is an infrared communication module for IrDA Ver. 1.4 (Low Power). The infrared LED, PIN photo diode, and waveform shaping LSI are all integrated into one single package. This module is designed for low power consumption. The very small package makes it a perfect fit for mobile devices. zFeatures 1) Infrared LED, PIN photo diode, LED driver and receiver frequency formation circuit built in. Improvement of EMI noise protection by Shield Case. 2) Applied to SIR (9.6k to 115.2kbps), MIR (0.576M, 1.152Mbps) and FIR(4Mbps). 3) Surface mount type. 4) Power down function built in. 5) Adjustable communication distance by LED load resistance value. zApplications Cellular phone, PDA, DVC, Digital still camera, Printer, Handy terminal etc. zAbsolute maximum ratings (Ta=25°C) Parameter Supply voltage Input voltage Operation temperature Storage temperature LED peak current Power dissipation Symbol Vcc / VLEDA / VIO Vin(3,4,5pin) Topr Tstg Ifp Pd Limits 6.5 ∗1 −0.3 to VIO+0.3 −25 to 85 −30 to 100 400 ∗2 300 ∗3 Units V V °C °C mA mW ∗1) This applies to all pins basis ground pin (8pin). ∗2) LED Peak Current : < 90 µs, On duty < 25% ∗3) When glass-epoxy board (70x70x1.6mm) mounted. In case of operating environment is over 25°C, 4mW would be reduced per each 1˚C stepping up. zRecommended operating conditions Parameter Symbol VCC Supply voltage VLEDA VIO Min. 2.4 2.7 1.7 Typ. 3.0 3.0...