W-CDMA Upconverter and PA Driver
www.DataSheet4U.com
19-2108; Rev 1; 8/03
KIT ATION EVALU E L B AVAILA
W-CDMA Upconverter and PA Driver with Power Con...
Description
www.DataSheet4U.com
19-2108; Rev 1; 8/03
KIT ATION EVALU E L B AVAILA
W-CDMA Upconverter and PA Driver with Power Control
General Description Features
o +6dBm Output Power with -46dBc ACPR o Ultra-Miniature UCSP Package o Upconverter Gain-Control Range: 35dB o Automatic Dynamic Current Control o 12mA Quiescent Supply Current o On-Chip LO Buffer with Disable o Low Out-of-Band Noise Power in RX Band: ≤ -144dBm/Hz at +6dBm POUT o No Interstage TX SAW Bandpass Filter Required
MAX2383
The MAX2383 upconverter and PA driver IC is designed for emerging ARIB (Japan) and ETSI-UMTS (Europe) W-CDMA applications. The IC includes an upconversion mixer with variable gain control, an LO buffer, and a variable-gain PA driver for output power control. The MAX2383 is designed to support the IMT-2000 frequency band. It includes a differential IF input port, an LO input port, and PA driver input/output ports. The upconverter mixer incorporates an AGC with over 30dB of gain control. The IC provides automatic throttle-back of PA driver and mixer current as output power is reduced. The main signal path and the LO buffer can be shutdown independently. The on-chip LO buffer can be kept ON while the main transmitter path is being turned on and off to minimize VCO pulling during TX gated-transmission. The MAX2383 is specified for +2.7V to +3.0V single supply and is housed in an ultra-miniature 3 x 4 UCSP™ package for optimum cost- and space-reduction and for best RF performance. The IC is targeted ...
Similar Datasheet