9-Channel Power Driver
HA13408
9-Channel Power Driver
ADE-207-206 (Z) 1st Edition July 1996 Description
The HA13408 9-channel power driver IC ...
Description
HA13408
9-Channel Power Driver
ADE-207-206 (Z) 1st Edition July 1996 Description
The HA13408 9-channel power driver IC is designed to drive dot matrix printer head. This IC can drive 9 pins without using any external components. HA13408 can be used for 2 system four-phase step drive, as every channel is used independently.
Features
High output current: 1.5 A/channel Max High sustaining voltage: 50 V Min Low saturation voltage Low supply current Low input current Compatible with TTL, LSTTL & 5 V CMOS Low thermal resistance package Zener diodes
Truth Table
Input Low High Open Output On Off Off
HA13408
Block Diagram
VCC2 VCC1 4 to 6 V 2
Out 1 IN 1
24 V ± 10%
1 4
Out 2
IN 2
3 6
Out 3
IN 3
7 8 5
GND
IN 4 10
9
Out 4 Out 5
IN 5 12
11
Out 6 IN 6 14
15 13
GND
IN 7 16
17
Out 7 Out 8
IN 8 18
21
Out 9 IN 9 20
23 19 22
GND GND
TAB
2
HA13408
Peak Current and Turn-Off Time
Figure 1 shows load current (Iout) and output terminal voltage (Vout) waveforms for the HA13408 driving an inductive load.
Hi Low
Vin
ton
T IP
Iout
0 tsus VCE(sus)
Vout
VCC2 VCE(sat)
Figure 1 Output Waveforms The peak output current (Ip) and sustain time (tsus) are obtained as follows;
IP = VCC2 – VCE(sat) R 1 – exp – R ton L . VCC2 = . R 1 – exp – R ton L
(1)
tsus =
L IP R ln 1 + R VCE(sus) – VCC2
(2)
Where L is load self-inductance and R is load direct current resistance. For example, under the following conditions: L = 5 mH, R = 22 Ω Supply voltage VCC2 = 24 V, T...
Similar Datasheet