EBT156

www.DataSheet4U.com EBT156 Vishay Dale Edgeboard Connectors Single Readout, Dip Solder, Eyelet and Wire Wrap™ Termination FEATURES 0.156" [3.96mm] C-C. Modified tuning fork contacts have chamfered lead-in to reduce wear on printed circuit board contacts without sacrificing contact pressure and wiping action. Accepts PC board thickness of 0.054" to 0.070" [1.37mm to 1.78mm]. Polarization on or between contact position in all sizes. Between contact polarization permits polarizing without loss of a contact position. Polarizing key is reinforced nylon, may be inserted by hand, requires no adhesive. Protected entry, provided by recessed leading edge of contact, permits the card slot to straighten and align the board before electrical contact is made. Prevents damage to contacts which might be caused by warped or out of tolerance boards. Optional terminal configurations, including eyelet (Type A), dip-solder (Types B, C, D, R), Wire Wrap™ (Types E, F). Connectors with Type A, B, C, D or R contacts are recognized under the Component Program of Underwriters Laboratories, Inc. Listed under File 65524, Project 77CH3889. ELECTRICAL SPECIFICATIONS Current Rating: 5 amps. Test Voltage Between Contacts: At Sea Level: 1800VRMS. At 70,000 feet [21,336 meters]: 450VRMS. Insulation Resistance: 5000 Megohm minimum. Contact Resistance: (Voltage Drop) 30 millivolts maximum at rated current with gold flash. APPLICATIONS For use with 0.062" [1.57mm] printed circuit boards requir...