AM10EW-C

www.DataSheet4U.com AM10EW-C Series 10 watt dc-dc converters POWER MODULES FOR PCB MOUNTING 4:1 WIDE INPUT RANGE REGULATED OUTPUT LOW RIPPLE & NOISE REMOTE ON/OFF CONTROL ( OPTIONAL) DC-DC CONVERTERS GENERAL DESCRIPTION Our AM10EW-C series is a family of cost effective 10W single output DC-DC converters. These converters are shielded on all six sides and encapsulated with a nickel-coated copper with a non-conductive base and dimensions of 50.8x25.4x10.5mm. The high performance features of our AM10EW-C components include short circuit protection with current limit auto recovery, tight line regulation and a high efficiency operation coefficient up to 83%. These wide range devices operate over 4:1 input voltage range, providing a continuously stable output voltage. Ten models operate from an input voltage range of 24 & 48VDC producing output voltages of 3,3, 5, 12, 15 & 24VDC. The normal operation is specified over the full operating temperature range of -25°C to +71°C with no derating required. Cooling is done by free air convection. ELECTRICAL SPECIFICATIONS All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications: Voltage range Filter Isolation Specifications: Rated voltage Resistance Capacitance General Specifications: Efficiency Switching frequency Output Specifications: Voltage accuracy Ripple Noise Short circuit protection Over current protection 24VDC, 9~36VDC 48 VDC, 18~75VDC...