AM15E-C

www.DataSheet4U.com AM15E-C Series 15 watt dc-dc converters POWER MODULES FOR PCB MOUNTING 2:1 WIDE INPUT RANGE REGULATED OUTPUT LOW RIPPLE & NOISE REMOTE ON/OFF CONTROL ( OPTIONAL) DC-DC CONVERTERS GENERAL DESCRIPTION Our AM15E-C series is a family of cost effective 15W single output DC-DC converters. These converters are shielded on all six sides and encapsulated with a nickel-coated copper with a non-conductive base and dimensions of 50.8x25.4x10.5mm. The high performance features of our AM15E-C components include short circuit protection with current limit auto recovery, tight line regulation and a high efficiency operation coefficient up to 83%. Fifteen models operate from an input voltage range of 12, 24 & 48VDC producing output voltages of 3,3, 5, 12, 15 & 24VDC. The normal operation is specified over the full operating temperature range of -25°C to +71°C with no derating required. Cooling is done by free air convection. ELECTRICAL SPECIFICATIONS All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications: Voltage range Output Specifications: Voltage accuracy Ripple Noise Short circuit protection Over current protection Filter Isolation Specifications: Rated voltage Resistance Capacitance General Specifications: Efficiency Switching frequency 12VDC, 9~18VDC 24VDC, 18~36VDC 48 VDC, 36~75VDC p (Pi) Network 1500VDC >1000 Mohms 1000pF 79% to 83% 300KHz, typ. 100% load ±2%, max. <...