Three-Phase Brushless Motor Driver
HA13563, HA13563V
Three-Phase Brushless Motor Driver
ADE-207-218A (Z) 2nd Edition December 1998 Description
The HA13563...
Description
HA13563, HA13563V
Three-Phase Brushless Motor Driver
ADE-207-218A (Z) 2nd Edition December 1998 Description
The HA13563/V are 3-phase brushless motor driver ICs with digital speed control. It is designed for use as a PPC or LBP drum motor driver and provides the functions and features listed below.
Functions
Three-phase brushless motor driver Direct PWM drive Digital discriminator plus PLL speed control Speed monitor Stuck rotor protection Current limiter Thermal protection (OTSD) Low voltage inhibit (LVI)
Features
Low saturation voltage Fly wheel diodes built-in FG signal digital filter built-in
Ordering Information
Product No. HA13563 HA13563V Package SP-23TA SP-23TB
HA13563/V
Pin Arrangement
23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
RNF U V W VCC READY u v w FG+ FG− PROT REG PWM CE D2 OSC OUT OSC IN PLL OUT DIS OUT INT IN INT OUT GND
(Top view)
2
HA13563/V
Pin Functions
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 Pin Name GND INT OUT INT IN DIS OUT PLL OUT OSC IN OSC OUT D2 CE PWM REG PROT Function Ground Integrator output Integrator input Speed discriminator output PLL output Clock oscillator input. Apply the external clock signal to this pin. Clock oscillator output. Use this pin to monitor the oscillator waveform. Clock divider selector input High: 1/8, Middle or Open: 1/32, and Low: 1/16. Chip enable input High or Open: stop, Low: drive on. PWM carrier oscillator. An external capacitor to charge and discharge, and an external re...
Similar Datasheet