DatasheetsPDF.com

dc-dc converters. AM20E-C Datasheet

DatasheetsPDF.com

dc-dc converters. AM20E-C Datasheet






AM20E-C converters. Datasheet pdf. Equivalent




AM20E-C converters. Datasheet pdf. Equivalent





Part

AM20E-C

Description

20 watt dc-dc converters

Manufacture

AIMTEC

Datasheet
Download AM20E-C Datasheet


AIMTEC AM20E-C

AM20E-C; www.DataSheet4U.com AM20E-C Series 20 w att dc-dc converters • • • POWER MODULES FOR PCB MOUNTING SYNCHRONOUS RE CTIFIER TOPOLOGY SURFACE MOUNT TECHNOLO GY • • STANDARD 2”x1” PACKAGE AND PINOUT REMOTE ON/OFF CONTROL ( OPT IONAL) DC-DC CONVERTERS GENERAL DESCR IPTION Our AM20E-C series is a family o f cost effective 20W single output DC-D C converters. These converters a.


AIMTEC AM20E-C

re shielded on all six sides and encapsu lated with a nickel-coated copper with a non-conductive base and dimensions of 50.8x25.4x10.5mm. The high performance features of our AM20E-C components inc lude short circuit protection with curr ent limit auto recovery, tight line reg ulation and a high efficiency operation coefficient up to 88%. Six models oper ate from an input .


AIMTEC AM20E-C

voltage range of 24 & 48VDC then convert s it into output voltages of 2.5, 3,3 & 5VDC. The normal operation is specifie d over the full operating temperature r ange of -25°C to +71°C with no derati ng required. Cooling is done by free ai r convection. ELECTRICAL SPECIFICATION S All specifications valid at nominal i nput voltage, full load and +25°C afte r warm-up time unless.



Part

AM20E-C

Description

20 watt dc-dc converters

Manufacture

AIMTEC

Datasheet
Download AM20E-C Datasheet




 AM20E-C
www.DataSheet4U.com
AM20E-C Series
20 watt dc-dc converters
POWER MODULES FOR PCB MOUNTING
SYNCHRONOUS RECTIFIER TOPOLOGY
SURFACE MOUNT TECHNOLOGY
STANDARD 2”x1” PACKAGE AND PINOUT
REMOTE ON/OFF CONTROL ( OPTIONAL)
GENERAL DESCRIPTION
Our AM20E-C series is a family of cost effective 20W single output
DC-DC converters. These converters are shielded on all six sides and
encapsulated with a nickel-coated copper with a non-conductive base
and dimensions of 50.8x25.4x10.5mm. The high performance features
of ourAM20E-C components include short circuit protection with cur-
rent limit auto recovery, tight line regulation and a high efficiency
operation coefficient up to 88%.
Six models operate from an input voltage range of 24 &
48VDC then converts it into output voltages of 2.5, 3,3 &
5VDC. The normal operation is specified over the full
operating temperature range of -25°C to +71°C with no
derating required. Cooling is done by free air convection.
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications:
Voltage range
Filter
24VDC, 18~36VDC
48 VDC, 36~75VDC
p (Pi) Network
Isolation Specifications:
Rated voltage
Resistance
Capacitance
1500VDC
>1000 Mohms
1000pF
General Specifications:
Efficiency
Switching frequency
85% to 88%
400KHz, typ. 100% load
Environmental Specifications:
Operating temperature
-25°C …+71°C
Storage temperature
-55°C …+105°C
Case temperature
+95°C, max.
Humidity (non-condensing) Up to 95%
Cooling
Free-air convection
Output Specifications:
Voltage accuracy
±2%
Ripple
<0.2% Vout +20mVmax (Vp-p)
Noise
<0.5% Vout +50mVmax (Vp-p)
Short circuit protection Current limit, auto-recovery
Over current protection Works over 120% of rating
and recovers automatically
Over voltage protection Zener diode clamp protection
Line regulation (HL-LL) ±0.5%(typ.)
Load regulation (10-100%) ±1%(typ.)
Temperature coefficient ±0.02%/°C
Physical Specifications:
Dimensions
50.8x25.4x10.5mm,
2.0x1.0x0.413inches
Weight
32g
Case material
Nickel-Coated Copper
with Non-Conductive base,
six sides’ shielded
MTBF: > 550,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC)
Specifications are subject to change without notification
82 Continued on next page
DataSheet4 U .com
TO ORDER CALL 1-888-9-AIMTEC





 AM20E-C
www.DataSheet4U.com
OUTLINE DIMENSIONS
& PIN CONNECTIONS
MECHANICAL DIMENSION (Top View)
AM20E-C Series
Pin Single
1 On/Off Control (Optional)
2 -V Input
3 +V Input
4 -V Iutput
5 No pin
6 +V Output
DERATING
BLOCK DIAGRAM
MODELS
Single output
Models
AM20E-2402SC
AM20E-2403SC
AM20E-2405SC
AM20E-4802SC
AM20E-4803SC
AM20E-4805SC
Input Voltage
18VDC-36VDC
36VDC-75VDC
Ouput Voltage
2.5VDC
3.3VDC
5VDC
2.5VDC
3.3VDC
5VDC
Ouput Current max.
5000mA
4250mA
4000mA
5000mA
4250mA
4000mA
VISIT US AT WWW.AIMTEC.CA
DataSheet4 U .com
83








Recommended third-party AM20E-C Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)