Document
www.DataSheet4U.com
NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 5V Output / 4A V7PC-04C Series
• • • • • • • • • Nonisolated Industry standard pinout Fixed frequency High efficiency means less power dissipation Optimized for cost Remote on/off Undervoltage lockout Over current and short circuit protection Industrial temperature range
POWER PRODUCTS
BP02V7PC-04C
Description
The Bel V7PC-04C series modules are non-isolated, boost DC/DC power converters that operate from a nominal 3.3V source. These converters provide an output voltage of 5V and are packaged in an industry standard single-in-line footprint with 4A maximum output. Standard features include remote on/off, over current and short circuit protection. A version of this converter is also available without remote on/off. These products may be used almost anywhere 5V is required and a 3.3V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment.
Applications
• • • Telecommunications Networking Computers and peripherals
Part Number Selection
Output Voltage 5.0V Input Voltage 3.3V Max. Output Current 4A Max. Output Power 20W Typical Efficiency 90% Part Number with Remote On/Off V7PC-04C500 Part Number without Remote On/Off V7PC-04C50N
©2004 Bel Fuse Inc. Specifications subject to change without notice. 02.04
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1
DataSheet 4 U .com
www.DataSheet4U.com
POWER PRODUCTS
BP02V7PC-04C
NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 5V Output / 4A
Absolute Maximum Ratings
Parameter Continuous Input Voltage Output Enable Terminal Voltage Ambient Temperature Storage Temperature Symbol Vin Vouten Tamb Tstor Min -0.3 -0.3 -40 -55 Typical Max 5 5 +85 +100 Unit V V °C °C
Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device.
Input Specifications
Parameter Operating Input Voltage Input Current No Load Input Current Remote Off Input Current Input Reflected Ripple Current1 Input Reflected Ripple Current (P-P)1 I2t Inrush Current Transient Turn On Voltage Threshold Turn Off Voltage Threshold 1.5 90 25 120 0.01 2.8 2 Symbol Vin Iin Min 3 Typical Max 4 8 400 150 50 200 0.02 2.9 2.7 Units V A mA mA mArms mApk A2s V V
Note: Input capacitance 270µF/10V, ESR = 0.03 Ω max at 100kHz @ 25° C. 1. With simulated source impedance of 500nH, 5Hz to 20MHz.
©2004 Bel Fuse Inc. Specifications subject to change without notice. 02.04
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 2
DataSheet 4 U .com
www.DataSheet4U.com
NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 5V Output / 4A
POWER PRODUCTS
BP02V7PC-04C
Output Specifications
Parameter Output Voltage Set Point1 Load Regulation Line Regulation Regulation Over Temperature 0° - 70° C Total Output Voltage Regulation Output Ripple and Noise2 Output Ripple and Noise2 Output Current Range Output DC Current Limit Short Circuit Surge Turn on Time Overshoot at Turn On Output Capacitance Transient Response3 ∆V 50% to 100% of Max Load Settling Time ∆V 100% to 50% of Max Load Settling Time Ts Ts 125 200 125 200 250 500 250 500 mV µs mV µs Cout 0 Iout Ioutlim Ioutsurge Ton 0 4.8 6 0.12 50 0 4.75 40 8 Symbol Vout Min 4.85 Typical 5 10 5 15 Max 5.15 25 15 45 Units V mV mV mV
5.25 100 25 4 7 0.2 150 3 1600
mV mVp-p mVrms A A A2s ms % µF
Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 1. Vin = 3.3V, Iout = full load, Ta = 25° C. 2. 0 - 20MHz BW, 0.1µF ceramic cap on output. 3. di/dt = 0.5A/uS, Vin = 3.3VDC, Ta = 25° C, and with a 470µF aluminum cap on output.
©2004 Bel Fuse Inc. Specifications subject to change without notice. 02.04
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 3
DataSheet 4 U .com
www.DataSheet4U.com
POWER PRODUCTS
BP02V7PC-04C
NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 5V Output / 4A
General Specifications
Parameter Efficiency1 Switching Frequency Weight Symbol η Fsw Min 87 180 Typical 90 200 9.3 220 Max Units % kHz g
1. Vin=3.3V, full load and Ta=25° C.
Control Specifications
Parameter Remote On/Off Signal Low (Unit Off) Signal High (Unit On) Symbol Vouten -0.3 2.8 0.3 5 Min Typical Max Units V V V
Efficiency Data
95.0% 90.0% 85.0% 80.0% 75.0% 70.0% 0.0 1.0 2.0 OUTPUT CURRENT 3.0 4.0 3.0V 3.3V 4.0V
©2004 Bel Fuse Inc. Specifications subject to change without notice. 02.04
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 4
DataSheet 4 U .com
EFFICIENCY
www.DataSheet4U.com
NON-ISOLATED DC/DC CONVERTERS
3.3V Input / 5V Output / 4A
POWER PRODUCTS
BP02V7PC-04C
Ripple and Noise
Ripple and noise at full load and 3.3Vdc input and Ta=25° C
Transient Response
Transient response: di.