LPV531

www.DataSheet4U.com LPV531 Programmable Micropower CMOS Input, Rail-to-Rail Output Operational Amplifier May 2006 LPV531 Programmable Micropower CMOS Input, Rail-to-Rail Output Operational Amplifier General Description The LPV531 is an extremely versatile operational amplifier. A single external resistor gives the system designer the ability to define the quiescent current, gain bandwidth product and output short circuit current. This innovative feature gives the system designer a method to dynamically switch the power level to optimize the performance of the op amp and meet the system design requirements. The LPV531 can be tailored to a wide variety of applications. It offers the system designer the ability to dynamically trade off supply current for bandwidth by adjusting the current drawn from the ISEL pin using a DAC or switching in different value resistors in series with the ISEL pin. The LPV531 is capable of operating from 73 kHz, consuming only 5 µA, to as fast as 4.6 MHz, consuming only 425 µA. The input offset voltage is relatively independent and therefore is not significantly affected by the chosen power level. Utilizing a CMOS input stage, the LPV531 achieves an input bias current of 50 fA and a common mode input voltage which extends from the negative rail to within 1.2V of the positive supply. The LPV531’s rail-to-rail class AB output stage enables this op amp to offer maximum dynamic range at low supply voltage. Offered in the space saving 6-pin TSOT23 pack...