Half Duplex RS-485/RS-422 Transceiver
www.DataSheet4U.com
3.3 V Slew Rate Limited, Half Duplex RS-485/RS-422 Transceiver ADM3493
FEATURES
Operates with 3.3 V...
Description
www.DataSheet4U.com
3.3 V Slew Rate Limited, Half Duplex RS-485/RS-422 Transceiver ADM3493
FEATURES
Operates with 3.3 V supply Interoperable with 5 V logic EIA RS-422 and RS-485 compliant over full CM range Data rate: 250 kbps Half duplex transceiver Reduced slew rates for low EMI 2 nA supply current in shutdown mode Up to 256 transceivers on a bus −7 V to +12 V bus common-mode range Specified over −40°C to +85°C temperature range 8 ns skew Available in 8-lead SOIC
FUNCTIONAL BLOCK DIAGRAM
VCC
ADM3493
RO RE DE DI D
05715-001
R A B
GND
Figure 1.
APPLICATIONS
Low power RS-485 applications EMI sensitive systems DTE-DCE interfaces Industrial control Packet switching Local area networks Level translators
GENERAL DESCRIPTION
The ADM3493 is a low power, differential line transceiver designed to operate using a single 3.3 V power supply. Low power consumption, coupled with a shutdown mode, makes it ideal for power-sensitive applications. The ADM3493 is suitable for communication on multipoint bus transmission lines. The device contains one driver and one receiver. Designed for half-duplex communication, the ADM3493 features a slew rate limited driver that minimizes EMI and reduces reflections caused by improperly terminated cables, allowing error-free data transmission at data rates up to 250 kbps.
The receiver input impedance is 96 kΩ, allowing up to 256 transceivers to be connected on the bus. A thermal shutdown circuit prevents excessive power dissipation caused by bus co...
Similar Datasheet