DatasheetsPDF.com

IAXG02C Dataheets PDF



Part Number IAXG02C
Manufacturers IDTech
Logo IDTech
Description LCD Module
Datasheet IAXG02C DatasheetIAXG02C Datasheet (PDF)

www.DataSheet4U.com Engineering Specification Engineering Specification Type 12.1 XGA Color TFT/LCD Module Model Name:IAXG02C Document Control Number : OEM I-902C-01 Note:Specification is subject to change without notice. Consequently it is better to contact to International Display Technology before proceeding with the design of your product incorporating this module. Sales Support International Display Technology (C) Copyright International Display Technology 2002 All Rights reserved. Aug.

  IAXG02C   IAXG02C


Document
www.DataSheet4U.com Engineering Specification Engineering Specification Type 12.1 XGA Color TFT/LCD Module Model Name:IAXG02C Document Control Number : OEM I-902C-01 Note:Specification is subject to change without notice. Consequently it is better to contact to International Display Technology before proceeding with the design of your product incorporating this module. Sales Support International Display Technology (C) Copyright International Display Technology 2002 All Rights reserved. August 28,2002 OEM I-902C-01 1/26 DataSheet 4 U .com www.DataSheet4U.com Engineering Specification i Contents i Contents ii Record of Revision 1.0 Handling Precautions 2.0 General Description 2.1 Characteristics 2.2 Functional Block Diagram 3.0 Absolute Maximum Ratings 4.0 Optical Characteristics 5.0 Signal Interface 5.1 Connectors 5.2 Interface Signal Connector 5.3 Interface Signal Description 5.4 Interface Signal Electrical Characteristics 5.4.1 Signal Electrical Characteristics for LVDS Receiver 5.4.2 LVDS Receiver Internal Circuit 5.4.3 Recommended Guidelines for Motherboard PCB Design and Cable Selection 5.5 Signal for Lamp connector 6.0 Pixel format image 7.0 Parameter guide line for CFL Inverter 8.0 Interface Timings 8.1 Timing Characteristics 8.2 Timing Definition 9.0 Power Consumption 10.0 Power ON/OFF Sequence 11.0 Mechanical Characteristics 12.0 National Test Lab Requirement (C) Copyright International Display Technology 2002 All Rights reserved. August 28,2002 OEM I-902C-01 2/26 DataSheet 4 U .com www.DataSheet4U.com Engineering Specification ii Record of Revision Date August 28,2002 Document Revision OEM I-902C-01 Page All Summary First Edition for customer. Basec on Internal Spec. as of July 4,2002. (Cable Length : 60mm +/-5) (C) Copyright International Display Technology 2002 All Rights reserved. August 28,2002 OEM I-902C-01 3/26 DataSheet 4 U .com www.DataSheet4U.com Engineering Specification 1.0 Handling Precautions O If any signals or power lines deviate from the power on/off sequence, it may cause shorten the life of the LCD module. O The LCD panel and the CFL are made of glass and may break or crack if dropped on a hard surface, so please handle them with care. O CMOS ICs are included in the LCD panel. They should be handled with care, to prevent electrostatic discharge. O Do not press the reflector sheet at the LCD module to any directions. O Do not stick the adhesive tape on the reflector sheet at the back of the LCD module. O Please handle with care when mount in the system cover. Mechanical damage for lamp cable/lamp connector may cause safety problems. O Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be supplied by power complied with requirements of Limited Power Source (2.5, IEC60950 or UL60950), or be applied exemption conditions of flammability requirements (4.7.3.4, IEC60950 or UL60950) in an end product. O The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit (2.4, IEC60950 or UL60950). O The fluorescent lamp in the liquid crystal display(LCD) contains mercury. Do not put it in trash that is disposed of in landfills. Dispose of it as required by local ordinances or regulations. O Never apply detergent or other liquid directly to the screen. O Wipe off water drop immediately. Long contact with water may cause discoloration or spots. O When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth; do not use solvents or abrasives. O Do not touch the front screen surface in your system, even bezel. O Gently wipe the covers and the screen with a soft cloth. O The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by International Display Technology for any infringements of patents or other right of the third partied which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of International Display Technology or others. The information contained herein may be changed without prior notice. It is therefore advisable to contact International Display Technology before proceeding with the design of equipment incorporating this product. O (C) Copyright International Display Technology 2002 All Rights reserved. August 28,2002 OEM I-902C-01 4/26 DataSheet 4 U .com www.DataSheet4U.com Engineering Specification 2.0 General Description This specification applies to the Type 12.1 Color TFT/LCD Module 'IAXG02C'. This module is designed for a display unit of a notebook style personal computer. The screen format and electrical interface are intended to support the XGA (1024(H) x 768(V)) screen. Support color is native 262k colors ( RGB 6-bit data driver ). All input signals are LVDS(Low Voltage Differential Signaling) interface compatible. This module does not contain an inverter card for backlight. 2.1 Characteristics The following items are chara.


28F320J3 IAXG02C IAXG01M


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)