IDT74LVC374A

www.DataSheet4U.com IDT74LVC374A 3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP INDUSTRIAL TEMPERATURE RANGE 3.3V CMOS OCTAL EDGE-TRIGGERED D-TYPE FLIPFLOP WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O 0.5 MICRON CMOS Technology ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0) VCC = 3.3V ± 0.3V, Normal Range VCC = 2.7V to 3.6V, Extended Range CMOS power levels (0.4µ W typ. static) Rail-to-rail output swing for increased noise margin All inputs, outputs, and I/O are 5V tolerant Supports hot insertion Available in SOIC, SSOP, QSOP, and TSSOP packages IDT74LVC374A FEATURES: DRIVE FEATURES: High Output Drivers: ±24mA Reduced system switching noise APPLICATIONS: 5V and 3.3V mixed voltage systems Data communication and telecommunication systems The LVC374A octal edge triggered D-type flip-flop is built using advanced dual metal CMOS technology. This device features 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The LVC374A device is particularly suitable for implementing buffer registers, input-output (I/O) ports, bidirectional bus drivers, and working registers. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels set up at the data (D) inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the hi...