OXMPCI952

www.DataSheet4U.com OXmPCI952 DATA SHEET FEATURES Dual 16C950 High performance UART channels 8-bit Pass-through Local Bus (PCI Bridge) IEEE1284 Compliant SPP/EPP/ECP parallel port (with external transceiver) Efficient 32-bit, 33MHz, Multi-function target-only PCI controller, fully compliant to PCI Local Bus specification 3.0, and PCI Power Management Specification 1.1 PCI and miniPCI Modes (with CLKRUN# and PME# generation in the D3cold state, in miniPCI mode) UARTs fully software compatible with 16C550-type devices. UART operation up to 60 MHz via external clock source. Up to 20MHz with the crystal oscillator. Baud rates up to 60Mbps in external 1x clock mode and 15Mbps in asynchronous mode. 128-byte deep FIFO per transmitter and receiver Flexible clock prescaler, from 1 to 31.875 Automated in-band flow control using programmable Xon/Xoff in both directions Automated out-of-band flow control using CTS#/RTS# and/or DSR#/DTR# Integrated High Performance Dual UARTs, 8-bit Local Bus/Parallel Port. 3.3v PCI/miniPCI interface. Arbitrary trigger levels for receiver and transmitter FIFO interrupts and automatic in-band and out-of-band flow control Infra-red (IrDA) receiver and transmitter operation 9-bit data framing, as well as 5,6,7 and 8 bits Detection of bad data in the receiver FIFO Global Interrupt Status and readable FIFO levels to facilitate implementation of efficient device drivers. Local registers to provide status/contr...