Low End Device AS-Interface IC
www.DataSheet4U.com
A²SI-Lite 14 / A²SI-Lite 16
Low End Device AS-Interface IC
Features
• • • • • • • AS-i Complete Sp...
Description
www.DataSheet4U.com
A²SI-Lite 14 / A²SI-Lite 16
Low End Device AS-Interface IC
Features
AS-i Complete Specification V2.11 compliant Integrated EEPROM Extended address mode operation as programmable option (up to 62 slaves) Dedicated IO-port structure: two data inputs, two data outputs, no parameter port pins Optional PWM outputs Integrated watchdog Temperature range -25°C to + 85°C
Description
A²SI-Lite (A²SI-L) is a monolithic CMOS integrated circuit certified for AS-i (Actuator Sensor-interface) networks. AS-i networks are intended for industrial automation. This integrated circuit is dedicated to be used as simplified interface IC for key control panels, simple sensors and small actuators. The main advantage of AS-i solutions is that actuators and sensors are connected using a twowire unshielded cable that is easy to install. This cable transports both power and information/data. AS-i network communication is based on the master-slave principle. The network can be extended (to cable lengths greater than 100m) by using the A²SI or A²SI-E in the repeater mode configuration. AS-i is a standard for the automation industry based on IEC 62026-2 and EN 50295. The device is available in a 14 and 16-pin SOP (150 mils) package.
Block Diagram
10uF
100nF 16MHz VIN OSC1 OSC2
Slave electronics supply voltage
18 mH
CAP 1uF 100nF
5V
Power Supply
Power on Reset
Oscillator
ASI-SW A²SI-L
Pulse Width Modulation
ASI +
ASIP
Receiver
DIGITAL LOGIC
ASI ASIN
Output...
Similar Datasheet