AN2526NFH

www.DataSheet4U.com ICs for TV AN2526NFH Automotive LCD TV signal processor IC I Overview The AN2526NFH is a video signal processing IC with an LCD's 5 V-source driving power supply for TFT color LCD (normally white type), and it supports NTSC and PAL systems. The main circuitry of this IC includes videosignal processing circuit, color signal processing circuit, interface circuit, synchronizing circuit and many color quality adjusting circuits. This IC converts the composite video signal or separated Y/C signal or RGB signals into RGB signals available for TFT color LCD. 12.00±0.20 10.00±0.20 48 49 33 32 (1.25) 10.00±0.20 12.00±0.20 Unit: mm 64 1 0.50 16 17 (1.25) 0.10±0.10 I Features Supply voltage: 5 V/7.5 V Built-in LCD's 5 V-source driving power supply Low consumption power (typ. 260 mW) Supporting NTSC and PAL Supporting composite, component and color differential signal input Video signal analog RGB (2 systems) One is for OSD (analog/digital). Each mode setting is possible with 3-wire or I2C Bus control. Electronic volume (D/A converter) built in Contrast/Brightness/γ correction circuit built in Horizontal and vertical display position adjustment are possible by serial control. Package: QFP-64HP10L (10 × 10 × 1.95 mm) Difference from the AN2526FH Compared to the AN2526FH, the sync. system gain is increased in no signal input. This may cause the picture on the screen to be swaying horizontally. So we cannot recommend this IC to be used in t...