ADA4851-4 Amps Datasheet

ADA4851-4 Datasheet PDF, Equivalent


Part Number

ADA4851-4

Description

(ADA4851-x) Rail-to-Rail Output Op Amps

Manufacture

Analog Devices

Total Page 24 Pages
PDF Download
Download ADA4851-4 Datasheet PDF


ADA4851-4
Low Cost, High Speed, Rail-to-Rail,
Output Op Amps
ADA4851-1/ADA4851-2/ADA4851-4
FEATURES
Qualified for automotive applications
High speed
130 MHz, −3 dB bandwidth
375 V/μs slew rate
55 ns settling time to 0.1%
Excellent video specifications
0.1 dB flatness: 11 MHz
Differential gain: 0.08%
Differential phase: 0.09°
Fully specified at +3 V, +5 V, and ±5 V supplies
Rail-to-rail output
Output swings to within 60 mV of either rail
Low voltage offset: 0.6 mV
Wide supply range: 2.7 V to 12 V
Low power: 2.5 mA per amplifier
Power-down mode
Available in space-saving packages
6-lead SOT-23, 8-lead MSOP, and 14-lead TSSOP
APPLICATIONS
Automotive infotainment systems
Automotive driver assistance systems
Consumer video
Professional video
Video switchers
Active filters
Clock buffers
GENERAL DESCRIPTION
The ADA4851-1 (single), ADA4851-2 (dual), and ADA4851-4
(quad) are low cost, high speed, voltage feedback rail-to-rail
output op amps. Despite their low price, these parts provide
excellent overall performance and versatility. The 130 MHz,
−3 dB bandwidth and high slew rate make these amplifiers well
suited for many general-purpose, high speed applications.
The ADA4851 family is designed to operate at supply voltages
as low as +3 V and up to ±5 V. These parts provide true single-
supply capability, allowing input signals to extend 200 mV
below the negative rail and to within 2.2 V of the positive rail.
On the output, the amplifiers can swing within 60 mV of either
supply rail.
With their combination of low price, excellent differential gain
(0.08%), differential phase (0.09º), and 0.1 dB flatness out to
11 MHz, these amplifiers are ideal for consumer video applications.
The ADA4851-1W, ADA4851-2W, and ADA4851-4W are
automotive grade versions, qualified for automotive applications.
Rev. J
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.
PIN CONFIGURATIONS
VOUT 1 ADA4851-1 6 +VS
–VS 2
5 POWER DOWN
+IN 3
4 –IN
TOP VIEW (Not to Scale)
Figure 1. ADA4851-1, 6-Lead SOT-23 (RJ-6)
ADA4851-2
OUT1 1
–IN1 2
+IN1 3
–VS 4
8 +VS
7 OUT
6 –IN2
5 +IN2
TOP VIEW
(Not to Scale)
Figure 2. ADA4851-2, 8-Lead MSOP (RM-8)
VOUT 1 1
–IN 1 2
+IN 1 3
+VS 4
+IN 2 5
–IN 2 6
VOUT 2 7
ADA4851-4
TOP VIEW
(Not to Scale)
14 VOUT 4
13 –IN 4
12 +IN 4
11 –VS
10 +IN 3
9 –IN 3
8 VOUT 3
Figure 3. ADA4851-4, 14-Lead TSSOP (RU-14)
See the Automotive Products section for more details. The
ADA4851 family is designed to work over the extended
temperature range (−40°C to +125°C).
4
G = +1
3 VS = 5V
RL = 1kΩ
2 CL = 5pF
1
0
–1
–2
–3
–4
–5
–6
1
10 100 1k
FREQUENCY (MHz)
Figure 4. Small-Signal Frequency Response
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2004–2010 Analog Devices, Inc. All rights reserved.

ADA4851-4
ADA4851-1/ADA4851-2/ADA4851-4
TABLE OF CONTENTS
Features .............................................................................................. 1 
Applications....................................................................................... 1 
Pin Configurations ........................................................................... 1 
General Description ......................................................................... 1 
Revision History ............................................................................... 2 
Specifications..................................................................................... 4 
Specifications with +3 V Supply................................................. 4 
Specifications with +5 V Supply................................................. 6 
Specifications with ±5 V Supply................................................. 8 
Absolute Maximum Ratings.......................................................... 10 
Thermal Resistance .................................................................... 10 
REVISION HISTORY
10/10—Rev. I to Rev. J
Added Output Characteristics, Linear Output Current
Parameter, Table 2............................................................................. 7
Added Output Characteristics, Linear Output Current
Parameter, Table 3............................................................................. 9
5/10—Rev. H to Rev. I
Changes to Power-Down Bias Current Parameter, Table 1 ........ 3
Moved Automotive Products Section .......................................... 20
4/10—Rev. G. to Rev. H
Added Automotive Product Information................... Throughout
Changes to Table 1 Through Table 3.............................................. 3
Updated Outline Dimensions ....................................................... 19
Changes to Ordering Guide .......................................................... 20
9/09—Rev. F. to Rev. G
Moved Automotive Products Section .......................................... 18
Updated Outline Dimensions ....................................................... 19
5/09—Rev. E. to Rev. F
Changes to Features, Applications, and General Description
Sections .............................................................................................. 1
Changes to Table 1............................................................................ 3
Changes to Table 2............................................................................ 5
Changes to Table 3............................................................................ 7
Changes to Figure 27 and Figure 28............................................. 13
Changes to Figure 47, Added Automotive Products Section ... 18
Updated Outline Dimensions ....................................................... 19
Changes to Ordering Guide .......................................................... 20
ESD Caution................................................................................ 10 
Typical Performance Characteristics ........................................... 11 
Circuit Description......................................................................... 17 
Headroom Considerations........................................................ 17 
Overload Behavior and Recovery ............................................ 18 
Single-Supply Video Amplifier................................................. 19 
Video Reconstruction Filter...................................................... 19 
Outline Dimensions ....................................................................... 20 
Ordering Guide .......................................................................... 21 
Automotive Products ................................................................. 21 
8/07—Rev. D to Rev. E
Changes to Applications ...................................................................1
Changes to Common-Mode Rejection Ratio, Conditions...........5
Changes to Headroom Considerations Section ......................... 13
4/06—Rev. C to Rev. D
Added Video Reconstruction Filter Section ............................... 15
5/05—Rev. B to Rev. C
Changes to General Description .....................................................1
Changes to Input Section .............................................................. 14
4/05—Rev. A to Rev. B
Added ADA4851-2, Added 8-Lead MSOP .....................Universal
Changes to Features ..........................................................................1
Changes to General Description .....................................................1
Changes to Table 1.............................................................................3
Changes to Table 2.............................................................................4
Changes to Table 3.............................................................................5
Changes to Table 4 and Figure 5......................................................6
Changes to Figure 12, Figure 15, and Figure 17 ............................8
Changes to Figure 18.........................................................................9
Changes to Figure 28 Caption ...................................................... 10
Changes to Figure 33...................................................................... 11
Changes to Figure 36 and Figure 38, Added Figure 39 ............. 12
Changes to Circuit Description Section...................................... 13
Changes to Headroom Considerations Section ......................... 13
Changes to Overload Behavior and Recovery Section.............. 14
Added Single-Supply Video Amplifier Section .......................... 15
Updated Outline Dimensions....................................................... 16
Changes to Ordering Guide .......................................................... 17
Rev. J | Page 2 of 24


Features Low Cost, High Speed, Rail-to-Rail, Outp ut Op Amps ADA4851-1/ADA4851-2/ADA4851- 4 FEATURES Qualified for automotive ap plications High speed 130 MHz, −3 dB bandwidth 375 V/μs slew rate 55 ns set tling time to 0.1% Excellent video spec ifications 0.1 dB flatness: 11 MHz Diff erential gain: 0.08% Differential phase : 0.09° Fully specified at +3 V, +5 V, and ±5 V supplies Rail-to-rail output Output swings to within 60 mV of eithe r rail Low voltage offset: 0.6 mV Wide supply range: 2.7 V to 12 V Low power: 2.5 mA per amplifier Power-down mode Av ailable in space-saving packages 6-lead SOT-23, 8-lead MSOP, and 14-lead TSSOP APPLICATIONS Automotive infotainment s ystems Automotive driver assistance sys tems Consumer video Professional video Video switchers Active filters Clock bu ffers GENERAL DESCRIPTION The ADA4851-1 (single), ADA4851-2 (dual), and ADA485 1-4 (quad) are low cost, high speed, vo ltage feedback rail-to-rail output op a mps. Despite their low price, these parts provide excellent ove.
Keywords ADA4851-4, datasheet, pdf, Analog Devices, ADA4851-x, Rail-to-Rail, Output, Op, Amps, DA4851-4, A4851-4, 4851-4, ADA4851-, ADA4851, ADA485, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)