MC56F8135

56F8335/56F8135 Data Sheet Preliminary Technical Data 56F8300 16-bit Digital Signal Controller MC56F8335 Rev. 5 01/2007 freescale.com Version History Rev. 0 Rev. 1 Rev. 2 Rev. 3 Rev. 4 Rev. 5 Document Revision History Description of Change Initial Release Deleted RSTO from Pin Group 2 (listed after Table 10-1). Deleted formula for Max Ambient Operating Temperature (Automotive) and Max Ambient Operating Temperature (Industrial) in Table 10-4. Added RoHS-compliance and “pb-free” language to back cover. Added information/corrected state during reset in Table 2-2. Clarified external reference crystal frequency for PLL in Table 10-14 by increasing maximum value to 8.4MHz. Replaced “Tri-stated” with an explanation in State During Reset column in Table 2-2. Revised Table 4-4 to include correct program Flash size. Added the following note to the description of the TMS signal in Table 2-2: Note: Always tie the TMS pin to VDD through a 2.2K resistor. Added the following note to the description of the TRST signal in Table 2-2: Note: For normal operation, connect TRST directly to VSS. If the design is to be used in a debugging environment, TRST may be tied to VSS through a 1K resistor. Please see http://www.freescale.com for the most current data sheet revision. 56F8335 Technical Data, Rev. 5 2 Freescale Semiconductor Preliminary 56F8335/56F8135 General Description Note: Features in italics are NOT available in the 56F8135 device. Up to 60 MIPS at 60MHz core frequency DS...