56F8365 Controllers Datasheet

56F8365 Datasheet PDF, Equivalent


Part Number

56F8365

Description

16-bit Digital Signal Controllers

Manufacture

Freescale Semiconductor

Total Page 30 Pages
Datasheet
Download 56F8365 Datasheet


56F8365
56F8365/56F8165
Data Sheet
Technical Data
56F8300
16-bit Digital Signal Controllers
MC56F8365
Rev. 9
02/2012
freescale.com

56F8365
Version History
Rev 0
Rev 1.0
Rev 2.0
Rev 3.0
Rev 4.0
Rev 5.0
Rev 6.0
Rev. 7
Rev. 8
Rev 8.1
Document Revision History
Description of Change
Pre-release, Alpha customers only
Initial Public Release
Added output voltage maximum value and note to clarify in Table 10-1; also removed overall life
expectancy note, since life expectancy is dependent on customer usage and must be
determined by reliability engineering. Clarified value and unit measure for Maximum allowed PD
in Table 10-3. Corrected note about average value for Flash Data Retention in Table 10-4.
Added new RoHS-compliant orderable part numbers in Table 13-1.
Corrected Data Flash on page 5
Deleted RSTO from Pin Group 2 (listed after Table 10-1). Deleted formula for Max Ambient
Operating Temperature (Automotive) and Max Ambient Operating Temperature (Industrial) in
Table 10-4. Added RoHS-compliance and “pb-free” language to back cover.
Added information/corrected state during reset in Table 2-2. Clarified external reference crystal
frequency for PLL in Table 10-14 by increasing maximum value to 8.4MHz.
Replaced “Tri-stated” with an explanation in State During Reset column in Table 2-2.
• Added the following note to the description of the TMS signal in Table 2-2:
Note: Always tie the TMS pin to VDD through a 2.2K resistor.
• Added the following note to the description of the TRST signal in Table 2-2:
Note: For normal operation, connect TRST directly to VSS. If the design is to be used in a debugging
environment, TRST may be tied to VSS through a 1K resistor.
• Remove pullup comment from PWM pins in Table 2-2.
• Add Figure 10-1 showing current voltage characteristics.
• In Table 10-23, correct interpretation of Calibration Factors to be viewed as worst case
factors.
• Add to Table 10-23 the DC drift of ADC over temperature.
• Removed “Preliminary” markings.
Please see http://www.freescale.com for the most current data sheet revision.
56F8365 Technical Data, Rev. 9
2
Freescale Semiconductor


Features 56F8365/56F8165 Data Sheet Technical Dat a 56F8300 16-bit Digital Signal Control lers MC56F8365 Rev. 9 02/2012 freescale .com Version History Rev 0 Rev 1.0 Rev 2.0 Rev 3.0 Rev 4.0 Rev 5.0 Rev 6.0 Re v. 7 Rev. 8 Rev 8.1 Document Revision History Description of Change Pre-relea se, Alpha customers only Initial Public Release Added output voltage maximum v alue and note to clarify in Table 10-1; also removed overall life expectancy n ote, since life expectancy is dependent on customer usage and must be determin ed by reliability engineering. Clarifie d value and unit measure for Maximum al lowed PD in Table 10-3. Corrected note about average value for Flash Data Rete ntion in Table 10-4. Added new RoHS-com pliant orderable part numbers in Table 13-1. Corrected Data Flash on page 5 De leted RSTO from Pin Group 2 (listed aft er Table 10-1). Deleted formula for Max Ambient Operating Temperature (Automot ive) and Max Ambient Operating Temperat ure (Industrial) in Table 10-4. Added RoHS-compliance and “pb.
Keywords 56F8365, datasheet, pdf, Freescale Semiconductor, 16-bit, Digital, Signal, Controllers, 6F8365, F8365, 8365, 56F836, 56F83, 56F8, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)