Programmable 300mA Camera Flash LED Driver
www.DataSheet4U.com
CAT3612
Programmable 300mA Camera Flash LED Driver
FEATURES
Dual matched...
Description
www.DataSheet4U.com
CAT3612
Programmable 300mA Camera Flash LED Driver
FEATURES
Dual matched regulated LED channels 300mA output current (150mA per channel) 1-wire EZDimTM Programmable LED Current 32 accurate dimming levels Power efficiency up to 90% Fractional pump 1x/1.5x Low noise input ripple Fixed High Frequency Operation 1MHz “Zero” Current Shutdown Mode Soft start and current limiting Short circuit protection Thermal shutdown protection 12-lead TDFN 3mm x 3mm package
PRODUCT DESCRIPTION
The CAT3612 is a high-efficiency 1x/1.5x fractional charge pump with programmable current in two LED channels. Each channel delivers accurate regulated current up to 150mA and make CAT3612 ideal for driving one or two flash LEDs. Low noise operation is achieved by operating at a constant switching frequency of 1MHz which allows the use of small external ceramic capacitors. The 1x/1.5x fractional charge pump supports a wide range of input voltages from 3V to 5.5V with efficiency up to 90%, and is ideal for Li-Ion battery powered devices. The EN/DIM logic input provides a 1-wire EZDimTM interface for dimming control of the LEDs. When enabled, pulsing the EN/DIM reduces the LED current on each negative edge in 31 linear steps from 150mA down to zero current. The device is available in the tiny 12-lead thin DFN 3mm x 3mm package with a max height of 0.8mm.
APPLICATION
Camera Flash Cellular Phones Digital Still Cameras
ORDERING INFORMATION
Part Number Pac...
Similar Datasheet