FET BIAS CONTROLLER AND TONE DETECTION
www.DataSheet4U.com
AT1511
Preliminary product Information
FET BIAS CONTROLLER AND TONE DETECTION
Features
•Provides b...
Description
www.DataSheet4U.com
AT1511
Preliminary product Information
FET BIAS CONTROLLER AND TONE DETECTION
Features
Provides bias for GaAs and HEMT FETs Drives up to three FETs Dynamic FET protection Drain current set by external resistor Regulated negative rail generator requires only 2 external capacitors Choice in drain voltage Wide supply voltage range Polarisation switch for LNBs - supporting zero volt gate switching topology. 22kHz tone detection for band switching Compliant with ASTRA control specifications SSOP surface mount package
Description
The AT1511 includes bias circuits to drive up to three external FETs. A control input to the device selects either one of two FETs as operational using 0V gate switching methodology, the third FET is permanently active. This feature is particularly used as an LNB polarisation switch. Also specific to LNB applications is the enhanced 22kHz tone detection and logic output feature which is used to enable high and low band frequency switching. The detector has been specifically designed to reject inerference such as low frequency signals and DiSEqCTM tone bursts - without the use of additional external components. Drain current setting of the AT1511 is user selectable over the range 0 to 15mA, this is achieved with the addition of a single resistor. The series also offers the choice of FET drain voltage, the AT1511 gives 2 volts. These devices are unconditionally stable over the full working temperature with the FETs in place,...
Similar Datasheet