USB High-Side Power Switches
www.DataSheet4U.com
AT1601
Preliminary Product Information
USB High-Side Power Switches with Flag Features
•Built-In (...
Description
www.DataSheet4U.com
AT1601
Preliminary Product Information
USB High-Side Power Switches with Flag Features
Built-In (Typical 110mΩ at 5.0V) N-Channel MOSFET Output can be Forced Higher Than Input (Off-State) Low Supply Current 100µA Typical On-State Current 1µA Typical Off-State Current 1A minimum Continuous Load Current 1.4A Typical Current Limit Open-Drain Fault Flag Output Hot Plug-In Application(Soft-Start) 1.8V to 5.5V Operating Range 1.7V Under-Voltage-Lockout(UVLO) Thermal Shutdown Protection SOP8 Package
General Description
The AT1601 is an integrated high-side power switch optimized for self-powered and buspowered Universal Serial Bus (USB) applications. With built-in a charge pump circuitry to drive the internal MOSFET switch, the switch’s low onresistance meets USB voltage drop requirements. A flag output is available to indicate fault conditions to the local USB controller. The AT1601 includes soft-start to limit inrush current during plug-in, 1.4A current limit to limit the output current to a safe level which meet the UL 25VA safety requirements, thermal shutdown to prevent catastrophic switch failure from highcurrent loads, under voltage lockout (UVLO) to ensure that the device remains off unless there is a valid input voltage present, and an enable input that is compatible with both 3.3V and 5V logic.
Applications
High-Side Power Protection Switch USB Power Management Notebook, Motherboard PCs
System Block
Aimtron reserves the right withou...
Similar Datasheet