2-Channel PWM Controller
www.DataSheet4U.com
AT1731
Preliminary
2-Channel PWM Controller for LCD Bias General Description
The AT1731 is a PWM D...
Description
www.DataSheet4U.com
AT1731
Preliminary
2-Channel PWM Controller for LCD Bias General Description
The AT1731 is a PWM DC/DC converter control IC with 2 channel outputs that can directly drive power MOSFET. This IC ia suitable for very small DC/DC converters because of their small and thin package(1.1 mm max.), and high operation frequency (up to 1.0 MHz).
Features
Low input voltage: 2.5V to 7V 2-Channels PWM Control: 1 Boost Controller(CH1) 1 Inverting Controller (CH2) Adjustable Soft start time and maximum duty cycle Built-in timer latch for short circuit protection: Delay time=216/(Switching frequency) Built-in under-voltage lockout, thermal shutdown. High operating frequency: 100kHz to 1MHz
Applications
LCD Displays Bias Power Supply for general equipment
Block Diagram
2F, No.10, Prosperity RD. II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 WWW: http://www.aimtron.com.tw Fax: 886-3-563-0879 Email: service@aimtron.com.tw 1
AT1731
Preliminary
2-Channel PWM Controller for LCD Bias
Pin Configuration
Ordering Information
Part number AT1731 Package TSSOP16 Marking AT1731P -
Pin Description
Symbol Pin No. Descript Symbol Pin No. Descript
FB1 IN1 NC GND PGND GND IN2 FB2
1 2 3 4 5 6 7 8
CH1 error amplifier output
OUT1
9 10 11 12 13 14 15 16
CH1 inverting input to OUT2 error amplifier Don’t connect NC Control blocks ground Power blocks ground Control blocks ground CH2 inverting input to error amplifier CH2 error ampl...
Similar Datasheet