Document
www.DataSheet4U.com
74AUP1G332
Low-power 3-input OR gate
Rev. 01 — 13 November 2006 Product data sheet
1. General description
The 74AUP1G332 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. The 74AUP1G332 provides a single 3-input OR gate.
2. Features
s Wide supply voltage range from 0.8 V to 3.6 V s High noise immunity s Complies with JEDEC standards: x JESD8-12 (0.8 V to 1.3 V) x JESD8-11 (0.9 V to 1.65 V) x JESD8-7 (1.2 V to 1.95 V) x JESD8-5 (1.8 V to 2.7 V) x JESD8-B (2.7 V to 3.6 V) s ESD protection: x HBM JESD22-A114-D Class 3A exceeds 4000 V x MM JESD22-A115-A exceeds 200 V x CDM JESD22-C101-C exceeds 1000 V s Low static power consumption; ICC = 0.9 µA (maximum) s Latch-up performance exceeds 100 mA per JESD 78 Class II s Inputs accept voltages up to 3.6 V s Low noise overshoot and undershoot < 10 % of VCC s IOFF circuitry provides partial Power-down mode operation s Multiple package options s Specified from −40 °C to +85 °C and −40 °C to +125 °C
www.DataSheet4U.com
NXP Semiconductors
74AUP1G332
Low-power 3-input OR gate
3. Ordering information
Table 1. Ordering information Package Temperature range Name 74AUP1G332GW 74AUP1G332GM 74AUP1G332GF −40 °C to +125 °C −40 °C to +125 °C −40 °C to +125 °C SC-88 XSON6 XSON6 Description plastic surface-mounted package; 6 leads Version SOT363 Type number
plastic extremely thin small outline package; no leads; SOT886 6 terminals; body 1 × 1.45 × 0.5 mm plastic extremely thin small outline package; no leads; SOT891 6 terminals; body 1 × 1 × 0.5 mm
4. Marking
Table 2. Marking Marking code aG aG aG Type number 74AUP1G332GW 74AUP1G332GM 74AUP1G332GF
5. Functional diagram
3 1 6 B A C
001aad933
Y
4
1 3 6
1
4
001aad934
Fig 1. Logic symbol
Fig 2. IEC logic symbol
B A C
001aad935
Y
Fig 3. Logic diagram
74AUP1G332_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 13 November 2006
2 of 16
www.DataSheet4U.com
NXP Semiconductors
74AUP1G332
Low-power 3-input OR gate
6. Pinning information
6.1 Pinning
74AUP1G332 74AUP1G332
A GND 1 2 6 5 C GND VCC B B 3
001aad930
A
1
6
C A GND
74AUP1G332
1 2 3 6 5 4 C VCC Y
2
5
VCC
3
4
Y
B
4
Y
001aad931
001aad932
Transparent top view
Transparent top view
Fig 4. Pin configuration SOT363 (SC-88)
Fig 5. Pin configuration SOT886 (XSON6)
Fig 6. Pin configuration SOT891 (XSON6)
6.2 Pin description
Table 3. Symbol A GND B Y VCC C Pin description Pin 1 2 3 4 5 6 Description data input A ground (0 V) data input B data output Y supply voltage data input C
7. Functional description
Table 4. Input A H X X L
[1] H = HIGH voltage level; L = LOW voltage level; X = don’t care.
Function table[1] Output B X H X L C X X H L Y H H H L
74AUP1G332_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 13 November 2006
3 of 16
www.DataSheet4U.com
NXP Semiconductors
74AUP1G332
Low-power 3-input OR gate
8. Limiting values
Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol VCC IIK VI IOK VO IO ICC IGND Tstg Ptot
[1] [2]
Parameter supply voltage input clamping current input voltage
Conditions VI < 0 V
[1]
Min −0.5 −0.5 [1]
Max +4.6 −50 +4.6 ±50 +4.6 ±20 50 −50 +150 250
Unit V mA V mA V mA mA mA °C mW
output clamping current VO > VCC or VO < 0 V output voltage output current supply current ground current storage temperature total power dissipation Tamb = −40 °C to +125 °C
[2]
Active mode and Power-down mode VO = 0 V to VCC
−0.5 −65 -
The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed. For SC-88 packages: above 87.5 °C the value of Ptot derates linearly with 4.0 mW/K. For XSON6 packages: above 45 °C the value of Ptot derates linearly with 2.4 mW/K.
9. Recommended operating conditions
Table 6. Symbol VCC VI VO Tamb ∆t/∆V Recommended operating conditions Parameter supply voltage input voltage output voltage ambient temperature input transition rise and fall rate VCC = 0.8 V to 3.6 V Active mode Power-down mode; VCC = 0 V Conditions Min 0.8 0 0 0 −40 0 Max 3.6 3.6 VCC 3.6 +125 200 Unit V V V V °C ns/V
74AUP1G332_1
© NXP B.V. 2006. All rights reserved.
Product data sheet
Rev. 01 — 13 November 2006
4 of 16
www.DataSheet4U.com
NXP Semiconductors
74AUP1G332
Low-power 3-input OR gate
10. Static characteristics
Table 7. Static characteristics At recommended operating conditions; voltage.