HA1631S03

www.DataSheet4U.com HA1631S01/02/03/04 Series Single CMOS Comparator (Push Pull/Open Drain Output) REJ03D0056-0100Z Rev.1.00 2003.08.08 Description The HA1631S01/02/03/04 are low power single CMOS Comparator featuring low voltage operation with typical current supply of 5 µA/50 µA. They are designed to operate from a single power supply. HA1631S01/02 have push-pull full swing outputs that allow direct connections to logic devices. The Open Drain version HA1631S03/04 enable Output Level shifting through external pull up resistors. Available in an ultra-small CMPAK-5 package, they occupy only 1/8 the area of the SOP-8 package. Features Low supply current HA1631S01/03: IDDtyp = 5 µA (VDD = 3.0 V) HA1631S02/04: IDDtyp = 50 µA (VDD = 3.0 V) Low voltage operation: VDD = 1.8 to 5.5 V Low input offset voltage: VIOmax = 5 mV Low input bias current: IIBtyp = 1 pA Maximum output voltage: VOHmin = 2.9 V (at VDD = 3.0 V) Input common voltage range includes ground On-chip ESD protection Available in CMPAK-5 and MPAK-5 package using Pb free lead frame Outline CMPAK-5V HA1631S01CM HA1631S02CM HA1631S03CM HA1631S04CM MPAK-5V HA1631S01LP HA1631S02LP HA1631S03LP HA1631S04LP Rev.1.00, 2003.08.08, page 1 of 22 HA1631S01/02/03/04 Series Pin Arrangement VDD 5 VOUT 4 + – 1 2 3 VIN(+) VSS VIN(–) Equivalent Circuit VDD * IN– IN+ OUTPUT VSS * Not available in Open Drain version (HA1631S03/04) Rev.1.00, 2003.08.08, page 2 of 22 HA1631S01/02/03/04 Series Absolute Maximum...